Intelligent Recognition and Trajectory Planning for Welds Grinding Based on 3D Visual Guidance
Machines · 03.04.2026 · 14 (4) · 393
DOI: 10.3390/machines14040393 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 03.04.2026. Verfasst von Pengrui Zhong und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China.
Abstract (Originalsprache)
In the fabrication process of pipelines for petrochemical and other industries, weld reinforcement is often excessive and adversely affects subsequent processes such as anticorrosion treatment and surface coating. Weld reinforcement must be removed through a grinding process. Welding deformation and fit-up errors often lead to highly irregular weld geometries, which makes robotic grinding difficult and causes the task to still heavily rely on manual operation. To address this issue, this study proposes an automatic weld recognition and grinding trajectory planning method based on 3D visualization and deep learning. A weld recognition network, termed WSR-Net, has been developed based on an improved PointNet++ architecture with a cross-attention mechanism, achieving a segmentation accuracy of 98.87% and a mean intersection over union of 90.71% on the test set. An intrinsic shape signature (ISS) key point selection algorithm with orthogonal slicing-based pruning optimization is developed to robustly extract key weld ridge points that characterize the weld trend on rugged weld surfaces. According to the height differences between the weld and the adjacent base metal surfaces, the grinding reference surface is fitted using the weld contour through the moving least-squares method. The ridge line points are projected onto the grinding reference surface along the local normal to generate the expected grinding trajectory points. The grinding trajectory that meets the process constraints is generated through reverse layer slicing. Grinding experiments demonstrate that the proposed WSR-Net achieves robust segmentation performance for both planar and curved surface welds. With the reverse layered trajectory planning method, the proposed method enables high-precision automatic grinding of complex spatially curved surface welds. The results show that the final grinding mean error is 0.316 mm, which satisfies the preprocessing requirements for subsequent processes. The proposed method provides a feasible technical method for the intelligent grinding of spatially curved surface welds.
Förderung
- National Key Research and Development Program of China
Zitieren
APA
Zhong, P., Xue, L., Huang, J., Zou, Y., & Han, F. (2026). Intelligent Recognition and Trajectory Planning for Welds Grinding Based on 3D Visual Guidance. Machines, 14(4), 393. https://doi.org/10.3390/machines14040393
Vancouver
Zhong P, Xue L, Huang J, Zou Y, Han F. Intelligent Recognition and Trajectory Planning for Welds Grinding Based on 3D Visual Guidance. Machines. 2026;14(4):393. doi:10.3390/machines14040393
BibTeX
@article{Zhong2026,
author = {Zhong, Pengrui and Xue, Long and Huang, Jiqiang and Zou, Yong and Han, Feng},
title = {Intelligent Recognition and Trajectory Planning for Welds Grinding Based on 3D Visual Guidance},
journal = {Machines},
year = {2026},
volume = {14},
number = {4},
pages = {393},
doi = {10.3390/machines14040393}
}
EUVIMED