Thermo-Mechanical Analysis and Fatigue Life Estimation of Shrink-Fit Tool Holders
Machines · 24.03.2026 · 14 (4) · 358
DOI: 10.3390/machines14040358 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 24.03.2026. Verfasst von Kubilay Aslantas und 2 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific and Technological Research Council of Turkey, Support Program for Scientific and Technological Research Projects-1001.
Abstract (Originalsprache)
The present study investigates the thermo-mechanical behaviour and fatigue life associated with the shrink-fit process of shrink-fit tool holders. These holders are an indispensable component of high-precision and high-speed machining processes in modern manufacturing industries. Shrink-fit holders are subjected to elevated levels of stress as a consequence of repeated heating and cooling cycles, which can result in clamping fatigue over time. In this study, a three-dimensional finite element model (FEM) of a holder manufactured from H13 tool steel in accordance with BT40 standards was created using ANSYS software. The numerical analyses included transient thermal and structural analyses, consisting of a 4.5-s induction heating stage at 10 kW power, followed by a 1200-s cooling process. The analysis yielded results that were corroborated by the experimental data. It was established that, upon the conclusion of the heating process, the temperature in the conical region of the holder attained a range of approximately 388–417 °C. Furthermore, it was ascertained that a radial expansion of approximately 17.2–22 µm, which is required for the successful insertion of the cutting tool into the inner bore, was achieved. The fatigue life prediction, which constitutes the main focus of the study, applied the Soderberg criterion and evaluated two basic loading scenarios: the first tool assembly and repeated tool assembly cycles. The calculations yielded a life estimate of approximately 12,407 cycles for the first tool assembly cycle and approximately 19,400 cycles for the repeated tool assembly cycle. Accordingly, the repeated tool assembly condition exhibited a longer fatigue life than the first tool assembly condition. The enhanced longevity observed in the repeated tool assembly scenario is attributed to the stress cycle not fully reaching zero during this process, resulting in a lower stress amplitude.
Förderung
- Scientific and Technological Research Council of Turkey
- Support Program for Scientific and Technological Research Projects-1001
Zitieren
APA
Aslantas, K., Oezkaya, E., & Çiçek, A. (2026). Thermo-Mechanical Analysis and Fatigue Life Estimation of Shrink-Fit Tool Holders. Machines, 14(4), 358. https://doi.org/10.3390/machines14040358
Vancouver
Aslantas K, Oezkaya E, Çiçek A. Thermo-Mechanical Analysis and Fatigue Life Estimation of Shrink-Fit Tool Holders. Machines. 2026;14(4):358. doi:10.3390/machines14040358
BibTeX
@article{Aslantas2026,
author = {Aslantas, Kubilay and Oezkaya, Ekrem and Çiçek, Adem},
title = {Thermo-Mechanical Analysis and Fatigue Life Estimation of Shrink-Fit Tool Holders},
journal = {Machines},
year = {2026},
volume = {14},
number = {4},
pages = {358},
doi = {10.3390/machines14040358}
}
EUVIMED