EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Combined Film Cooling and Swirl on the Thermal Performance of a Contoured High Pressure Turbine Vane of a Modern Turbofan Engine: A Numerical Study

Djihane Mazouz, Zakaria Mansouri, Salaheddine Azzouz

Machines · 18.03.2026 · 14 (3) · 344

DOI: 10.3390/machines14030344 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 18.03.2026. Verfasst von Djihane Mazouz und 2 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Modern high-pressure turbine (HPT) nozzle guide vanes (NGVs) operate under non-uniform inlet conditions, including hot streaks and swirl, which can induce complex flow phenomena and uneven thermal loading. These effects, particularly at the hub-vane corner, can compromise NGV durability, yet the combined influence of swirl and film cooling remains underexplored. The objective of this study is to investigate the aerothermal behaviour of contoured first-stage NGVs under varying swirl intensities and directions to improve understanding of hub and corner thermal protection and failure mechanisms. Steady, compressible RANS simulations were conducted with the k-ω SST turbulence model. A vane with a contoured hub and multiple film cooling rows was designed and analysed under axial and swirling inflows, both clockwise and counter-clockwise, with swirl numbers of Sn = ±0.2 and ±0.4. Axial flow achieved the highest area-averaged film cooling effectiveness (FCE) of 0.617. Negative swirl (Sn = −0.4) improved suction-side corner FCE to 0.215 but reduced pressure-side cooling, whereas positive swirl (Sn = 0.4) improved pressure-side cooling but reduced suction-side FCE to 0.043. Corner temperatures under positive swirl reached 1780 K, consistent with promoting failure, while negative swirl reduced corner temperatures to 1516 K. Aerodynamic losses increased with swirl, with negative swirl generating 5.78% higher total pressure losses than the axial baseline. Swirl altered the corner vortex topology, affecting boundary layer interactions and local heat transfer. These results highlight a trade-off between thermal protection and aerodynamic efficiency, emphasising that optimising NGV performance requires careful design of hub cooling and consideration of swirl direction and intensity.

Zitieren

APA

Mazouz, D., Mansouri, Z., & Azzouz, S. (2026). Effect of Combined Film Cooling and Swirl on the Thermal Performance of a Contoured High Pressure Turbine Vane of a Modern Turbofan Engine: A Numerical Study. Machines, 14(3), 344. https://doi.org/10.3390/machines14030344

Vancouver

Mazouz D, Mansouri Z, Azzouz S. Effect of Combined Film Cooling and Swirl on the Thermal Performance of a Contoured High Pressure Turbine Vane of a Modern Turbofan Engine: A Numerical Study. Machines. 2026;14(3):344. doi:10.3390/machines14030344

BibTeX
@article{Mazouz2026,
  author = {Mazouz, Djihane and Mansouri, Zakaria and Azzouz, Salaheddine},
  title = {Effect of Combined Film Cooling and Swirl on the Thermal Performance of a Contoured High Pressure Turbine Vane of a Modern Turbofan Engine: A Numerical Study},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {3},
  pages = {344},
  doi = {10.3390/machines14030344}
}
Kostenlos starten →