EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Digital Twin-Enabled Framework for Agrivoltaic System Design, Simulation, Monitoring and Control

Eshan Edirisinghe, George Wu, Divye Maggo, Chi-Tsun Cheng, Toh Yen Pang, Azizur Rahman, Angela L. Avery, Kieran R. Murphy, Carlos A. Lora

Machines · 24.02.2026 · 14 (3) · 254

DOI: 10.3390/machines14030254 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 24.02.2026. Verfasst von Eshan Edirisinghe und 8 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Food Agility Cooperative Research Centre.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Agrivoltaics offer a sustainable solution to the growing competition between food and energy production. However, their adoption is often constrained by the design and operation challenges associated with optimising the complex trade-off between crop yield and photovoltaic (PV) output. Digital twins can mitigate these risks, yet most agricultural digital twins operate as fragmented digital shadows, lacking high-fidelity modelling, advanced simulation, and bidirectional control capabilities. This study presents a comprehensive, end-to-end digital twin framework to address these limitations. The framework integrates a high-resolution 3D orchard model, reconstructed via UAV photogrammetry, with a CesiumJS-based web interface linked to a modular IoT architecture built on Node-RED, Message Queuing Telemetry Transport (MQTT) protocol and InfluxDB for real-time monitoring and control. A PV simulation engine supports the design, simulation and optimisation of agrivoltaic systems. Bidirectional communication was validated through remote actuation of a physical solar tracker, demonstrating integration among the 3D environment, sensor data and control systems to achieve a closed-loop digital twin. Simulation analyses suggested that panel orientation and row spacing exert a dominant influence on crop-level light distribution. Simulation results demonstrated that a 90° azimuth configuration achieved the highest daily energy yield of 53.97 kWh but reduced peak crop-level irradiance to 205 W/m2. In contrast, the baseline 0° configuration offered a balanced output of 40.86 kWh with a peak light availability of 338 W/m2. The validated, interoperable digital twin architecture provides a reference model for the design, simulation, monitoring and control of an agrivoltaic system, reducing investment uncertainty and supporting sustainable food–energy co-production.

Förderung

  • Food Agility Cooperative Research Centre

Zitieren

APA

Edirisinghe, E., Wu, G., Maggo, D., Cheng, C., Pang, T. Y., Rahman, A., Avery, A. L., Murphy, K. R., & Lora, C. A. (2026). A Digital Twin-Enabled Framework for Agrivoltaic System Design, Simulation, Monitoring and Control. Machines, 14(3), 254. https://doi.org/10.3390/machines14030254

Vancouver

Edirisinghe E, Wu G, Maggo D, Cheng C, Pang TY, Rahman A, et al. A Digital Twin-Enabled Framework for Agrivoltaic System Design, Simulation, Monitoring and Control. Machines. 2026;14(3):254. doi:10.3390/machines14030254

BibTeX
@article{Edirisinghe2026,
  author = {Edirisinghe, Eshan and Wu, George and Maggo, Divye and Cheng, Chi-Tsun and Pang, Toh Yen and Rahman, Azizur and Avery, Angela L. and Murphy, Kieran R. and Lora, Carlos A.},
  title = {A Digital Twin-Enabled Framework for Agrivoltaic System Design, Simulation, Monitoring and Control},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {3},
  pages = {254},
  doi = {10.3390/machines14030254}
}
Kostenlos starten →