Vibration Characteristics and Fatigue Performance of Bogie Frame with Inner Axle Box for High-Speed Trains
Machines · 14.11.2025 · 13 (11) · 1056
DOI: 10.3390/machines13111056 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 14.11.2025. Verfasst von Tao Guo und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Science and Technology Research and Development Programme Project of China National Railway Administration Group, the China National Railway Group Co., Ltd. Research Project.
Abstract (Originalsprache)
With the continuous increase in high-speed train operation speeds, lightweight bogie design has become a key means to enhance dynamic performance, which also increases the risk of structural fatigue. High-frequency wheel–rail excitations are transmitted to the bogie frame and couple with its higher-order modes at around 200 Hz, inducing local high-frequency resonance. This coupling markedly increases the stress amplitude within the affected frequency range and accelerates vibration-induced fatigue damage. This study investigates the vibration fatigue characteristics of a bogie frame with an inner axle box under high-speed operation and wheel polygon wear conditions. Using a high-speed wheel–rail interaction test rig, dynamic stresses and the vibration acceleration of the bogie frame are measured under different speeds and polygon orders. Based on modal analysis and vibration fatigue methods, a high-frequency vibration fatigue assessment method for the bogie is developed. Wheel polygon significantly amplifies mid-to-high-frequency vibration energy, and for the bogie frame with an inner axle box, pronounced modal coupling is observed at around 200 Hz. In particular, under the 11th-order polygon condition, the equivalent stress at critical locations such as the traction motor seat weld seam exceeds the fatigue limit, while the effect of the 20th-order polygon is relatively mitigated. The proposed vibration fatigue assessment method provides a theoretical basis for the safe design and operational maintenance of high-speed trains with bogie frames with inner axle boxes.
Förderung
- the Science and Technology Research and Development Programme Project of China National Railway Administration Group
- the China National Railway Group Co., Ltd. Research Project
Zitieren
APA
Guo, T., Chen, B., Wang, Y., Cai, G., Hou, M., & Dong, Q. (2025). Vibration Characteristics and Fatigue Performance of Bogie Frame with Inner Axle Box for High-Speed Trains. Machines, 13(11), 1056. https://doi.org/10.3390/machines13111056
Vancouver
Guo T, Chen B, Wang Y, Cai G, Hou M, Dong Q. Vibration Characteristics and Fatigue Performance of Bogie Frame with Inner Axle Box for High-Speed Trains. Machines. 2025;13(11):1056. doi:10.3390/machines13111056
BibTeX
@article{Guo2025,
author = {Guo, Tao and Chen, Bingzhi and Wang, Yuedong and Cai, Guojie and Hou, Maorui and Dong, Qi},
title = {Vibration Characteristics and Fatigue Performance of Bogie Frame with Inner Axle Box for High-Speed Trains},
journal = {Machines},
year = {2025},
volume = {13},
number = {11},
pages = {1056},
doi = {10.3390/machines13111056}
}
EUVIMED