Lagrangian Simulation of Sediment Erosion in Francis Turbines Using a Computational Tool in Python Coupled with OpenFOAM
Machines · 15.08.2025 · 13 (8) · 725
DOI: 10.3390/machines13080725 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 15.08.2025. Verfasst von Mateo Narváez und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Escuela Politécnica Nacional, Foundation for Science and Technology (FCT), Interreg Atlantic Area Programme.
Abstract (Originalsprache)
Hydraulic erosion from suspended sediment is a major degradation mechanism in Francis turbines of sediment-laden rivers, especially in Andean hydropower plants. This study presents a Python3.9-based computational tool integrating the empirical Oka erosion model within a Lagrangian particle tracking framework, coupled to single-phase CFD in OpenFOAM 10. The novelty lies in a reduced-domain approach that omits the spiral casing and replicates its particle-induced swirl via a custom algorithm, lowering meshing complexity and computational cost while preserving erosion prediction accuracy. The method was applied to a full-scale Francis turbine at the San Francisco hydropower plant in Ecuador (nominal discharge 62.4 m3/s, rated output 115 MW, rotational speed 34.27 rad/s), operating under volcanic and erosive sediment loads. Maximum erosion rates reached ~1.2 × 10−4 mm3/kg, concentrated on runner blade trailing edges and guide vane pressure sides. Impact kinematics showed most collisions at near-normal angles (85°–98°, peak at 92°) and 6–9 m/s velocities, with rare 40 m/s impacts causing over 50× more loss than average. The workflow identifies critical wear zones, supports redesign and coating strategies, and offers a transferable, open-source framework for erosion assessment in turbines under diverse sediment-laden conditions.
Förderung
- Escuela Politécnica Nacional
- Foundation for Science and Technology (FCT)
- Interreg Atlantic Area Programme
Zitieren
APA
Narváez, M., Guamán, J., Hidalgo, V. H., Pérez-Sánchez, M., & Ramos, H. M. (2025). Lagrangian Simulation of Sediment Erosion in Francis Turbines Using a Computational Tool in Python Coupled with OpenFOAM. Machines, 13(8), 725. https://doi.org/10.3390/machines13080725
Vancouver
Narváez M, Guamán J, Hidalgo VH, Pérez-Sánchez M, Ramos HM. Lagrangian Simulation of Sediment Erosion in Francis Turbines Using a Computational Tool in Python Coupled with OpenFOAM. Machines. 2025;13(8):725. doi:10.3390/machines13080725
BibTeX
@article{Narvez2025,
author = {Narváez, Mateo and Guamán, Jeremy and Hidalgo, Víctor Hugo and Pérez-Sánchez, Modesto and Ramos, Helena M.},
title = {Lagrangian Simulation of Sediment Erosion in Francis Turbines Using a Computational Tool in Python Coupled with OpenFOAM},
journal = {Machines},
year = {2025},
volume = {13},
number = {8},
pages = {725},
doi = {10.3390/machines13080725}
}
EUVIMED