EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design of Variable Steering Ratio for Steer-by-Wire System Based on Driver’s Steering Characteristics

Kun Yang, Haobin Jiang, Long Chen, Yixiao Chen, Bin Tang

Machines · 05.06.2025 · 13 (6) · 489

DOI: 10.3390/machines13060489 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 05.06.2025. Verfasst von Kun Yang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jiangsu Province Strategic Emerging Industry Development Program “Research and Development of Key Core Technologies for Advanced Chassis Electric Integration o…, Taizhou Key Science and Technology Support Program, Industry prospect and Common Key Technologies Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aiming at the characteristic of a variable and optimized steering ratio of the Steer-by-Wire System (SBW), this paper studies the design method of the steering ratio starting from the influence of the steering ratio on the vehicle steering maneuverability and the driver’s steering burden. Through the analysis of the influencing factors of the steering ratio and the analysis of the driver’s steering characteristics, a yaw rate gain control model is established. Combined with the evaluation index of handling stability, the yaw rate gain is optimized, and the optimal yaw rate gain corresponding to different scenarios and different drivers’ steering characteristics is determined, so as to design the characteristics of the variable steering ratio that meet the preferences of different drivers. In order to verify the control effect of the variable gain steering ratio, a comprehensive feedback control strategy for the front wheel angle is established, and vehicles with a fixed steering ratio and a constant gain steering ratio are selected as references. Comparative tests under typical working conditions are carried out in the “driver-vehicle-road” closed-loop simulation system. The results show that the variable gain steering ratio considering the driver’s steering characteristics can not only improve the handling stability of the vehicle at medium and high speeds, but also enhance the driver’s steering comfort, enabling the SBW to achieve the goal of “the vehicle adapting to the person”.

Förderung

  • Jiangsu Province Strategic Emerging Industry Development Program “Research and Development of Key Core Technologies for Advanced Chassis Electric Integration o…
  • Taizhou Key Science and Technology Support Program
  • Industry prospect and Common Key Technologies Project

Zitieren

APA

Yang, K., Jiang, H., Chen, L., Chen, Y., & Tang, B. (2025). Design of Variable Steering Ratio for Steer-by-Wire System Based on Driver’s Steering Characteristics. Machines, 13(6), 489. https://doi.org/10.3390/machines13060489

Vancouver

Yang K, Jiang H, Chen L, Chen Y, Tang B. Design of Variable Steering Ratio for Steer-by-Wire System Based on Driver’s Steering Characteristics. Machines. 2025;13(6):489. doi:10.3390/machines13060489

BibTeX
@article{Yang2025,
  author = {Yang, Kun and Jiang, Haobin and Chen, Long and Chen, Yixiao and Tang, Bin},
  title = {Design of Variable Steering Ratio for Steer-by-Wire System Based on Driver’s Steering Characteristics},
  journal = {Machines},
  year = {2025},
  volume = {13},
  number = {6},
  pages = {489},
  doi = {10.3390/machines13060489}
}
Kostenlos starten →