Digital Twins for Defect Detection in FDM 3D Printing Process
Machines · 23.05.2025 · 13 (6) · 448
DOI: 10.3390/machines13060448 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 23.05.2025. Verfasst von Chao Xu und 7 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, Young Elite Scientists Sponsorship Program by Jilin Association for Science and Technology.
Abstract (Originalsprache)
Additive manufacturing (AM, also known as 3D printing) is a bottom–up process where variations in process conditions can significantly influence the quality and performance of the printed parts. Digital twin (DT) technology can measure process parameters and printed part characteristics in real-time, achieving online monitoring, analysis, and optimization of the AM process. Existing DT research on AM focuses on simulating the printing process and lacks real-time defect detection and twinning of actual printed objects, which hinders the timely detection and correction of defects. This study developed a DT system for fused deposition modeling (FDM) AM technology that not only accurately simulates the printing process but also performs real-time quality monitoring of the printed parts. A laser profilometer and industrial camera were integrated into the printer to detect and collect real-time morphological data on the printed object. The custom-developed DT software could convert the morphological data of the printed parts into a DT model. By comparing the DT model of the printed object with its three-dimensional model, defect detection of the printed parts was achieved, where the quality of the printed parts was evaluated using a defect percentage index. This study combines DT and AM to achieve process quality monitoring, demonstrating the potential of DT technology in reducing printing defects and improving the quality of printed parts.
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
- Young Elite Scientists Sponsorship Program by Jilin Association for Science and Technology
- Changchun Science and Technology Bureau
- Department of Science and Technology of Jilin Province, China
- the 10th Youth Talent Support Program of the China Association for Science and Technology (CAST)
Zitieren
APA
Xu, C., Lu, S., Zhang, Y., Zhang, L., Song, Z., Liu, H., Liu, Q., & Ren, L. (2025). Digital Twins for Defect Detection in FDM 3D Printing Process. Machines, 13(6), 448. https://doi.org/10.3390/machines13060448
Vancouver
Xu C, Lu S, Zhang Y, Zhang L, Song Z, Liu H, et al. Digital Twins for Defect Detection in FDM 3D Printing Process. Machines. 2025;13(6):448. doi:10.3390/machines13060448
BibTeX
@article{Xu2025,
author = {Xu, Chao and Lu, Shengbin and Zhang, Yulin and Zhang, Lu and Song, Zhengyi and Liu, Huili and Liu, Qingping and Ren, Luquan},
title = {Digital Twins for Defect Detection in FDM 3D Printing Process},
journal = {Machines},
year = {2025},
volume = {13},
number = {6},
pages = {448},
doi = {10.3390/machines13060448}
}
EUVIMED