EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Objective Optimization of Milling Ti-6Al-4V Alloy for Improved Surface Integrity and Sustainability Performance

Djordje Cica, Sasa Tesic, Milisav Markovic, Branislav Sredanovic, Stevo Borojevic, Milan Zeljkovic, Davorin Kramar, Franci Pušavec

Machines · 08.03.2025 · 13 (3) · 221

DOI: 10.3390/machines13030221 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 08.03.2025. Verfasst von Djordje Cica und 7 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ti-6Al-4V is a titanium-based alloy that is widely used in a diverse range of applications, especially in industries such as biomedical and aerospace. Several lubricooling techniques have been introduced to enhance the machinability of these materials. Among them, environmentally friendly strategies are gaining in importance, with sustainability trends rising in manufacturing. The present research investigates the effect of two eco-friendly lubricooling techniques (minimum quantity lubrication and cryogenic cooling), along with other cutting parameters (cutting speed and feed per tooth), on the surface roughness and microhardness of the machined surfaces, which are identified as one of the most frequently implemented indicators of surface integrity in the ball-end milling of the Ti-6Al-4V alloy. In addition, the total electrical energy consumption of the machine tools under different cooling/lubrication conditions was also analyzed. The results obtained showed that cryogenic cooling enhanced milling performance as compared to MQL. Moreover, a multi-objective parameter optimization model integrating the machining responses (surface roughness, microhardness, energy consumption, and productivity) and sustainability metrics (environmental impact, operator’s health and safety, and waste management) was introduced. It was found that cryogenic cooling outperformed the MQL method in terms of both machining performance and environmental impact. An analysis of variance (ANOVA) was carried out to evaluate the significance of each process parameter on the multiple performance index. The results indicate that feed per tooth, cooling method, and cutting speed were significant, with respective contributions of 39.4%, 36.8%, and 22.9%. Finally, the optimal parameter setting was verified through a confirmation test and the results reveal that an improvement was observed in the machining responses and multiple performance index.

Zitieren

APA

Cica, D., Tesic, S., Markovic, M., Sredanovic, B., Borojevic, S., Zeljkovic, M., Kramar, D., & Pušavec, F. (2025). Multi-Objective Optimization of Milling Ti-6Al-4V Alloy for Improved Surface Integrity and Sustainability Performance. Machines, 13(3), 221. https://doi.org/10.3390/machines13030221

Vancouver

Cica D, Tesic S, Markovic M, Sredanovic B, Borojevic S, Zeljkovic M, et al. Multi-Objective Optimization of Milling Ti-6Al-4V Alloy for Improved Surface Integrity and Sustainability Performance. Machines. 2025;13(3):221. doi:10.3390/machines13030221

BibTeX
@article{Cica2025,
  author = {Cica, Djordje and Tesic, Sasa and Markovic, Milisav and Sredanovic, Branislav and Borojevic, Stevo and Zeljkovic, Milan and Kramar, Davorin and Pušavec, Franci},
  title = {Multi-Objective Optimization of Milling Ti-6Al-4V Alloy for Improved Surface Integrity and Sustainability Performance},
  journal = {Machines},
  year = {2025},
  volume = {13},
  number = {3},
  pages = {221},
  doi = {10.3390/machines13030221}
}
Kostenlos starten →