Drilling Parameter Control Based on Online Identification of Drillability and Multi-Objective Optimization
Machines · 27.02.2025 · 13 (3) · 191
DOI: 10.3390/machines13030191 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 27.02.2025. Verfasst von Jianbo Dai und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Open Funding of the State Key Laboratory of Coal Mine Disaster Prevention and Control, Postgraduate Research & Practice Innovation Program of Jiangsu Province.
Abstract (Originalsprache)
Aiming at the problem that drilling parameters are difficult to adjust in time for the driller due to the complex geological environment in underground coal mines, a drilling parameter control method based on online identification of drillability and multi-objective optimization of drilling parameters is proposed. A drillability grade identification model is established, with rotational speed and torque as input parameters, which can accurately identify the current drilling state. A multi-objective optimization model of the optimal drilling parameters is established with the mechanical specific energy and drilling speed prediction model as the objective functions, and the NSGA-II algorithm and TOPSIS algorithm are used for solutions and decision-making. A fuzzy PID controller is established. For the control of rotational speed parameters and drilling pressure parameters, the advantages and disadvantages of the fuzzy PID control method and the traditional PID control method are compared through simulation and experiments. A control method based on the drillability identification model and the multi-objective optimization model is established. According to the different drillability grades, the drilling parameters are adjusted in time to ensure the normal drilling state. By constantly approaching the optimal parameters through the drilling parameters, the drilling efficiency is improved. Through experimental verification, this control method effectively prevents the occurrence of drilling speed reduction and intermittent sticking and can adjust the drilling parameters to continuously optimize.
Förderung
- National Natural Science Foundation of China
- Open Funding of the State Key Laboratory of Coal Mine Disaster Prevention and Control
- Postgraduate Research & Practice Innovation Program of Jiangsu Province
- Graduate Innovation Program of the China University of Mining and Technology
Zitieren
APA
Dai, J., Yin, X., Zhang, Y., Si, L., Wei, D., Wang, Z., & Zhao, L. (2025). Drilling Parameter Control Based on Online Identification of Drillability and Multi-Objective Optimization. Machines, 13(3), 191. https://doi.org/10.3390/machines13030191
Vancouver
Dai J, Yin X, Zhang Y, Si L, Wei D, Wang Z, et al. Drilling Parameter Control Based on Online Identification of Drillability and Multi-Objective Optimization. Machines. 2025;13(3):191. doi:10.3390/machines13030191
BibTeX
@article{Dai2025,
author = {Dai, Jianbo and Yin, Xilu and Zhang, Yan and Si, Lei and Wei, Dong and Wang, Zhongbin and Zhao, Longmei},
title = {Drilling Parameter Control Based on Online Identification of Drillability and Multi-Objective Optimization},
journal = {Machines},
year = {2025},
volume = {13},
number = {3},
pages = {191},
doi = {10.3390/machines13030191}
}
EUVIMED