EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparison of Automation-Supported and Conventional Methods for Measuring Energy Consumption in Computer Numerical Control Machining

Erman Zurnacı, Sabri Uzuner, Engin Nas

Machines · 14.02.2025 · 13 (2) · 148

DOI: 10.3390/machines13020148 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 14.02.2025. Verfasst von Erman Zurnacı und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: TUBITAK (The Scientific and Technological Research Council of Turkey).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Optimizing energy consumption in machining processes is critical for achieving sustainable manufacturing. This study introduces an Automation-Supported measurement approach that integrates a custom power analyzer with real-time data logging and visualization capabilities to accurately measure energy usage during CNC (computer numerical control) operations. Statistical comparisons were conducted using the independent samples t-test and Taguchi analysis to evaluate the effectiveness of the proposed method against traditional measurement techniques. The results revealed that there is a statistically significant difference (p < 0.05) in the current measurements across X, Z, and spindle motors between the proposed and conventional methods. The advanced method based on automation reduced the error rate in measuring spindle motor power consumption due to the selection of processing parameters from 34.17% to 2.7%. Additionally, Taguchi analysis demonstrated that the measurement method influenced the optimization of machining parameters, with S/N ratio improvements observed. These findings confirm that the proposed method enhances energy efficiency, reduces environmental impact, and supports sustainable manufacturing practices.

Förderung

  • TUBITAK (The Scientific and Technological Research Council of Turkey)

Zitieren

APA

Zurnacı, E., Uzuner, S., & Nas, E. (2025). Comparison of Automation-Supported and Conventional Methods for Measuring Energy Consumption in Computer Numerical Control Machining. Machines, 13(2), 148. https://doi.org/10.3390/machines13020148

Vancouver

Zurnacı E, Uzuner S, Nas E. Comparison of Automation-Supported and Conventional Methods for Measuring Energy Consumption in Computer Numerical Control Machining. Machines. 2025;13(2):148. doi:10.3390/machines13020148

BibTeX
@article{Zurnac2025,
  author = {Zurnacı, Erman and Uzuner, Sabri and Nas, Engin},
  title = {Comparison of Automation-Supported and Conventional Methods for Measuring Energy Consumption in Computer Numerical Control Machining},
  journal = {Machines},
  year = {2025},
  volume = {13},
  number = {2},
  pages = {148},
  doi = {10.3390/machines13020148}
}
Kostenlos starten →