EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fault Feature Extraction Based on Variational Modal Decomposition and Lifting Wavelet Transform: Application in Gear of Mine Scraper Conveyor Gearbox

Zhengxiong Lu, Linyue Li, Chuanwei Zhang, Shuanfeng Zhao, Lingxiao Gong

Machines · 30.11.2024 · 12 (12) · 871

DOI: 10.3390/machines12120871 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 30.11.2024. Verfasst von Zhengxiong Lu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Development Program of Shaanxi, Shaanxi Provincial Education Department.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Vibration-based fault diagnosis of chain conveyor gearboxes is challenging under high load and strong shock conditions. This paper applies motor current characteristic analysis technology to scraper conveyor gearbox fault diagnosis and proposes a fault feature extraction method. Firstly, a variational mode decomposition algorithm combined with a genetic algorithm is used to divide the original current signal into several sub-bands with different frequency modulation information, and irrelevant information is preliminarily eliminated. Secondly, an intrinsic mode function (IMF) sub-band fault information extraction method based on lifting wavelet transform is proposed. The minimum entropy value is used to set the sensitive parameters involved in lifting wavelet transform, and the power supply current frequency and noise interference information of a scraper conveyor are removed from the current signal. Finally, it is proved that variational mode decomposition combined with lifting wavelet transform can effectively diagnose the fault of a scraper conveyor by comparative experiments.

Förderung

  • Key Research and Development Program of Shaanxi
  • Shaanxi Provincial Education Department

Zitieren

APA

Lu, Z., Li, L., Zhang, C., Zhao, S., & Gong, L. (2024). Fault Feature Extraction Based on Variational Modal Decomposition and Lifting Wavelet Transform: Application in Gear of Mine Scraper Conveyor Gearbox. Machines, 12(12), 871. https://doi.org/10.3390/machines12120871

Vancouver

Lu Z, Li L, Zhang C, Zhao S, Gong L. Fault Feature Extraction Based on Variational Modal Decomposition and Lifting Wavelet Transform: Application in Gear of Mine Scraper Conveyor Gearbox. Machines. 2024;12(12):871. doi:10.3390/machines12120871

BibTeX
@article{Lu2024,
  author = {Lu, Zhengxiong and Li, Linyue and Zhang, Chuanwei and Zhao, Shuanfeng and Gong, Lingxiao},
  title = {Fault Feature Extraction Based on Variational Modal Decomposition and Lifting Wavelet Transform: Application in Gear of Mine Scraper Conveyor Gearbox},
  journal = {Machines},
  year = {2024},
  volume = {12},
  number = {12},
  pages = {871},
  doi = {10.3390/machines12120871}
}
Kostenlos starten →