Geometric Modeling and Error Propagation Analysis of an Over-Constrained Spindle Head with Kinematic Interactions
Machines · 18.09.2024 · 12 (9) · 651
DOI: 10.3390/machines12090651 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 18.09.2024. Verfasst von Yifeng Shen und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Open Research Fund of State Key Laboratory of Intelligent Manufacturing Equipment and Technology, Science Foundation of Zhejiang Sci-Tech University (ZSTU), Scientific Research Fund of Zhejiang Provincial Education Department.
Abstract (Originalsprache)
This study presents a comprehensive geometric modeling and error propagation analysis for a 3-degrees-of-freedom spindle head, focusing on an over-constrained parallel mechanism. Four geometric error models are established for the over-constrained spindle head, each considering different combinations of constraint wrenches. A set of sensitivity indices is formulated to evaluate the effectiveness of these models. Comparative sensitivity analysis suggests that a model incorporating all constraint wrenches is suitable for error propagation analysis. Two error propagation indices are introduced to quantify the impact of the geometric source errors on the position and orientation of an individual limb structure. The coupled error propagation indices account for the kinematic interactions among limb structures, allowing for a detailed analysis of the spindle head’s terminal accuracy. The relative deviations of error propagation indices are utilized to assess the quantitative impact of kinematic interactions on the geometric errors of an individual limb structure. Furthermore, this study analyzes the cumulative effects of kinematic errors from three limb structures to reflect the influence of kinematic interactions on the terminal accuracy of the spindle head. The findings indicate that geometric errors of the limbs in such an over-constrained spindle head are mutually compensatory, reducing linear and angular errors and enhancing the spindle head’s terminal accuracy.
Förderung
- Open Research Fund of State Key Laboratory of Intelligent Manufacturing Equipment and Technology
- Science Foundation of Zhejiang Sci-Tech University (ZSTU)
- Scientific Research Fund of Zhejiang Provincial Education Department
Zitieren
APA
Shen, Y., Tang, T., & Fang, H. (2024). Geometric Modeling and Error Propagation Analysis of an Over-Constrained Spindle Head with Kinematic Interactions. Machines, 12(9), 651. https://doi.org/10.3390/machines12090651
Vancouver
Shen Y, Tang T, Fang H. Geometric Modeling and Error Propagation Analysis of an Over-Constrained Spindle Head with Kinematic Interactions. Machines. 2024;12(9):651. doi:10.3390/machines12090651
BibTeX
@article{Shen2024,
author = {Shen, Yifeng and Tang, Tengfei and Fang, Hanliang},
title = {Geometric Modeling and Error Propagation Analysis of an Over-Constrained Spindle Head with Kinematic Interactions},
journal = {Machines},
year = {2024},
volume = {12},
number = {9},
pages = {651},
doi = {10.3390/machines12090651}
}
EUVIMED