EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling, Simulation and Control of the Double Delta Surgical Robot

George Moustris, Costas Tzafestas

Machines · 04.09.2024 · 12 (9) · 620

DOI: 10.3390/machines12090620 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 04.09.2024. Verfasst von George Moustris und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union—NextGenerationEU.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Robotic surgery has been steadily growing, with many new platforms entering the field. Research platforms, however, are limited in number, require a sizable capital expenditure or are difficult to access. This paper presents the analysis and development of a novel surgical manipulator based on parallel kinematics, utilizing the Delta robot as a foundational element. We investigate various aspects including kinematics, statics, workspace and constraints of the manipulator. Additionally, a physics-based model is constructed to validate the analysis and facilitate the creation of a control algorithm aimed at input tracking, particularly for teleoperation purposes. Two experiments are conducted to evaluate the manipulator’s performance: one focusing on circle tracking and a second one employing real kinematic data from a suturing task. The results indicate a maximum tracking error under 1 mm and an RMS error below 0.6 mm for the first trial and 0.3 mm by 2 mm for the suturing tracking task, respectively. Furthermore, through non-linear Bode analysis we demonstrate that the closed-loop system effectively decouples input–output cross-gain terms while maintaining minimal amplification in the diagonal terms. This suggests that the system is well-suited for the intricate and precise motions required in surgical procedures.

Förderung

  • European Union—NextGenerationEU

Zitieren

APA

Moustris, G., & Tzafestas, C. (2024). Modeling, Simulation and Control of the Double Delta Surgical Robot. Machines, 12(9), 620. https://doi.org/10.3390/machines12090620

Vancouver

Moustris G, Tzafestas C. Modeling, Simulation and Control of the Double Delta Surgical Robot. Machines. 2024;12(9):620. doi:10.3390/machines12090620

BibTeX
@article{Moustris2024,
  author = {Moustris, George and Tzafestas, Costas},
  title = {Modeling, Simulation and Control of the Double Delta Surgical Robot},
  journal = {Machines},
  year = {2024},
  volume = {12},
  number = {9},
  pages = {620},
  doi = {10.3390/machines12090620}
}
Kostenlos starten →