A Study on the Static and Dynamic Characteristics of the Spindle System of a Spiral Bevel Gear Grinding Machine
Machines · 04.09.2024 · 12 (9) · 619
DOI: 10.3390/machines12090619 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 04.09.2024. Verfasst von Shuai Huang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Nature Science Foundation of Changsha, the Natural Science Foundation of Hunan Province, the Post-doctoral Project of Hunan University.
Abstract (Originalsprache)
To enhance the static and dynamic performance of the grinding wheel spindle system, with the gear grinding machine (YKF2060) as the research object, a static mechanics model of the spindle system was established based on Castigliano’s theorem, taking into account the equivalent effect of the triple-point contact ball bearing at the front end of the spindle. Meanwhile, based on the overall transfer matrix method, a dynamic model of the main spindle–eccentric shaft dual-rotor system was established, taking into account the effects of shear deformation and gyroscopic moments. On this basis, the effect of the spindle span, the front and rear overhang of the eccentric shaft, and the bearing stiffness on the static stiffness and first-order critical speed of the system was analyzed. Finally, static stiffness experiments, modal tests, and finite element simulation models were conducted to verify the static and dynamic models. The results show that the stiffness of the front outer bearing has the greatest influence on the static and dynamic performance of the system, while the stiffness of the rear inner bearing has the least influence. The relative errors of the static stiffness and the first two natural frequencies between static stiffness experiments, modal tests, and finite element simulation models are less than 10%, and the mode shapes match well. The established static and dynamic model can effectively reflect both the static and dynamic characteristics of the spindle system.
Förderung
- Nature Science Foundation of Changsha
- the Natural Science Foundation of Hunan Province
- the Post-doctoral Project of Hunan University
Zitieren
APA
Huang, S., Wang, J., Huang, K., & Yu, J. (2024). A Study on the Static and Dynamic Characteristics of the Spindle System of a Spiral Bevel Gear Grinding Machine. Machines, 12(9), 619. https://doi.org/10.3390/machines12090619
Vancouver
Huang S, Wang J, Huang K, Yu J. A Study on the Static and Dynamic Characteristics of the Spindle System of a Spiral Bevel Gear Grinding Machine. Machines. 2024;12(9):619. doi:10.3390/machines12090619
BibTeX
@article{Huang2024,
author = {Huang, Shuai and Wang, Juxin and Huang, Kaifeng and Yu, Jianwu},
title = {A Study on the Static and Dynamic Characteristics of the Spindle System of a Spiral Bevel Gear Grinding Machine},
journal = {Machines},
year = {2024},
volume = {12},
number = {9},
pages = {619},
doi = {10.3390/machines12090619}
}
EUVIMED