Performance Optimization and Simulation Test of No-Tillage Corn Precision Planter Based on Discrete Element Method (DEM)
Machines · 10.07.2024 · 12 (7) · 465
DOI: 10.3390/machines12070465 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 10.07.2024. Verfasst von Jingyu Yang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Innovative Research Group Project of the National Natural Science Foundation of China, Natural Science Foundation of Shandong Province, Training Program of Innovation and Entrepreneurship for Undergraduates.
Abstract (Originalsprache)
In order to test the influence of the structural design of a no-tillage corn precision planter on vibration stability performance, a vibration model was constructed with the help of MATLAB/Simulink, and it was concluded that the vibration response curve of the no-tillage corn precision planter was relatively smooth. Based on the theory of the discrete element method (DEM), taking the planting apparatus of the no-tillage corn precision planter as the research object, firstly, a DEM single-factor test was carried out to investigate the effects of the slot inclination angle, number of slots, and rotational speed of the planter plate on the disturbance performance. Then, a three-factor, three-level orthogonal test was conducted with the maximum amount of seed discharging, the minimum average speed, and the minimum average kinetic energy as the final optimization objectives, and the qualified rate of seed discharging and the leakage rate as the evaluation indexes. The results show that the larger the inclination angle, the higher the number of slots, and the faster the rotational speed, the more violent the particle disturbance. At the same time, when the slot inclination angle of the planter plate is 60°, the number of slots is 20, and the rotational speed is 55 rpm, the seed discharge efficiency is the highest, at this time, the seed discharge qualification rate of maize particles is 95%, and the leakage rate is 3%; the results of this test can provide technical support for the research of the same kind of precision sowing equipment in the future.
Förderung
- Innovative Research Group Project of the National Natural Science Foundation of China
- Natural Science Foundation of Shandong Province
- Training Program of Innovation and Entrepreneurship for Undergraduates
Zitieren
APA
Yang, J., Wu, H., Guo, A., Rugerinyange, R., Liu, C., Zhao, Z., Han, W., & Yin, L. (2024). Performance Optimization and Simulation Test of No-Tillage Corn Precision Planter Based on Discrete Element Method (DEM). Machines, 12(7), 465. https://doi.org/10.3390/machines12070465
Vancouver
Yang J, Wu H, Guo A, Rugerinyange R, Liu C, Zhao Z, et al. Performance Optimization and Simulation Test of No-Tillage Corn Precision Planter Based on Discrete Element Method (DEM). Machines. 2024;12(7):465. doi:10.3390/machines12070465
BibTeX
@article{Yang2024,
author = {Yang, Jingyu and Wu, Hailong and Guo, Anfu and Rugerinyange, Regis and Liu, Chang and Zhao, Zhengyu and Han, Wenchao and Yin, Lvfa},
title = {Performance Optimization and Simulation Test of No-Tillage Corn Precision Planter Based on Discrete Element Method (DEM)},
journal = {Machines},
year = {2024},
volume = {12},
number = {7},
pages = {465},
doi = {10.3390/machines12070465}
}
EUVIMED