EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Experimental and Numerical Study of the Laser Ablation of Bronze

Esmaeil Ghadiri Zahrani, Vasiliki E. Alexopoulou, Emmanouil L. Papazoglou, Bahman Azarhoushang, Angelos Markopoulos

Machines · 16.01.2024 · 12 (1) · 63

DOI: 10.3390/machines12010063 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 16.01.2024. Verfasst von Esmaeil Ghadiri Zahrani und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of lasers in various precise material removal processes has emerged as a viable and efficient alternative to traditional mechanical methods. However, the laser ablation of materials is a complex, multi-parameter process where scanning paths need to be repeated multiple times. This repetition causes changes in the absorption and temperature distribution along the scanning path, thereby affecting the accuracy of the ablation. Therefore, it is crucial to thoroughly study these phenomena. This article presents an experimental and numerical study on the laser ablation of bronze (DIN: 1705) in a multi-track ablation process. Specifically, six consecutive passes using a ns laser at three different energy densities were conducted. After each pass, measurements of the ablation depth and pile-up height were taken at three distinct points along the track (start, middle, and end) to evaluate the efficiency and quality of the process. To gain a deeper understanding of the underlying physical mechanisms, a numerical simulation model based on the Finite Element Method (FEM) was developed. The effective absorptivity was defined through reverse engineering, and the material’s cooling rates were also estimated. This study’s findings provide significant insights into the influence of machining parameters on the ablation process and its progression with varying numbers of consecutive repetitions. A primarily linear correlation was deduced between the ablation depth, energy density, and number of repetitions, while the relationship with the pile-up height appeared to be more ambiguous and nonlinear. The estimated cooling rates ranged from 106 to 1010 [K/s]. Additionally, a heat accumulation phenomenon and a gradual temperature increase resulting from consecutive laser scans were also observed. A good agreement between the simulation results and experiments for the ablation depths was observed.

Zitieren

APA

Zahrani, E. G., Alexopoulou, V. E., Papazoglou, E. L., Azarhoushang, B., & Markopoulos, A. (2024). An Experimental and Numerical Study of the Laser Ablation of Bronze. Machines, 12(1), 63. https://doi.org/10.3390/machines12010063

Vancouver

Zahrani EG, Alexopoulou VE, Papazoglou EL, Azarhoushang B, Markopoulos A. An Experimental and Numerical Study of the Laser Ablation of Bronze. Machines. 2024;12(1):63. doi:10.3390/machines12010063

BibTeX
@article{Zahrani2024,
  author = {Zahrani, Esmaeil Ghadiri and Alexopoulou, Vasiliki E. and Papazoglou, Emmanouil L. and Azarhoushang, Bahman and Markopoulos, Angelos},
  title = {An Experimental and Numerical Study of the Laser Ablation of Bronze},
  journal = {Machines},
  year = {2024},
  volume = {12},
  number = {1},
  pages = {63},
  doi = {10.3390/machines12010063}
}
Kostenlos starten →