EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of the Stiffness of the Turntable Bearing Joint on the Dynamic Characteristics of the Five-Axis Machine Tool Rotary System

Shi Wu, Weijie Lei, Tai Yu, Zeyu Dong, Taorui Liu

Machines · 16.03.2023 · 11 (3) · 389

DOI: 10.3390/machines11030389 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 16.03.2023. Verfasst von Shi Wu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State Key Program of National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The positioning accuracy and machining performance of the five-axis machine tool are significantly impacted by the dynamic characteristics of the rotary system of the two-axis rotary table machine. In this study, first, the stiffness of the joint bearing of the rotary table system is calculated, and the effect of bearing clearance and external load on the stiffness is analyzed. Second, considering the stiffness characteristics of the joint, the natural frequency and mode shapes of the turntable system are calculated. Finally, the influence of turntable angle and bearing stiffness on the dynamic characteristics of the turntable system is analyzed. The results show that the natural frequency of the rotary table system does not change obviously with the axial stiffness of the turntable bearing joint, but increases significantly with the increase in the radial stiffness. The first order natural frequency of the turntable decreases with the increase in the swing angle, and the change in the first order natural frequency is 77.43 Hz. The research results provide theoretical basis and guidance for machine tool design and use.

Förderung

  • State Key Program of National Natural Science Foundation of China

Zitieren

APA

Wu, S., Lei, W., Yu, T., Dong, Z., & Liu, T. (2023). Effect of the Stiffness of the Turntable Bearing Joint on the Dynamic Characteristics of the Five-Axis Machine Tool Rotary System. Machines, 11(3), 389. https://doi.org/10.3390/machines11030389

Vancouver

Wu S, Lei W, Yu T, Dong Z, Liu T. Effect of the Stiffness of the Turntable Bearing Joint on the Dynamic Characteristics of the Five-Axis Machine Tool Rotary System. Machines. 2023;11(3):389. doi:10.3390/machines11030389

BibTeX
@article{Wu2023,
  author = {Wu, Shi and Lei, Weijie and Yu, Tai and Dong, Zeyu and Liu, Taorui},
  title = {Effect of the Stiffness of the Turntable Bearing Joint on the Dynamic Characteristics of the Five-Axis Machine Tool Rotary System},
  journal = {Machines},
  year = {2023},
  volume = {11},
  number = {3},
  pages = {389},
  doi = {10.3390/machines11030389}
}
Kostenlos starten →