Detection for Disc Cutter Wear of TBM Using Magnetic Force
Machines · 15.03.2023 · 11 (3) · 388
DOI: 10.3390/machines11030388 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 15.03.2023. Verfasst von Jialin Han und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Sichuan Province of China, Chunhui Project Foundation of the Education Department of China.
Abstract (Originalsprache)
To replace the worn-out cutter of tunnel boring machines timely, it is crucial to inspect the cutter’s wear. In this work, a novel detection method based on magnetic force is proposed to overcome the drawback of nonlinearity in current detecting technology. The principle is that the magnetic force between the cutter and the permanent magnet linearly decreases with increasing wear. Firstly, the magnetic force is investigated by the finite element simulation to find the optimal placement of the permanent magnet to realize both high linearity and sensitivity. Secondly, a highly-sensitive force sensor with an S shape is designed to measure the magnetic force. The four strain gauges in the force sensor are combined into a Wheatstone bridge to suppress the common-mode effect, such as temperature. Experimental testing on the magnetic force is performed to verify the feasibility of the detection method. The testing result shows that the magnetic force linearly decreases with the increasing wear loss at a rate of −793 mN/mm. The accuracy of the detecting method approaches 1 mm, which is of the same order of magnitude as those in previous studies.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Sichuan Province of China
- Chunhui Project Foundation of the Education Department of China
Zitieren
APA
Han, J., Xiang, H., Feng, Q., He, J., Li, R., & Zhao, W. (2023). Detection for Disc Cutter Wear of TBM Using Magnetic Force. Machines, 11(3), 388. https://doi.org/10.3390/machines11030388
Vancouver
Han J, Xiang H, Feng Q, He J, Li R, Zhao W. Detection for Disc Cutter Wear of TBM Using Magnetic Force. Machines. 2023;11(3):388. doi:10.3390/machines11030388
BibTeX
@article{Han2023,
author = {Han, Jialin and Xiang, Hongjiang and Feng, Qiuyue and He, Jiangbo and Li, Rong and Zhao, Wensheng},
title = {Detection for Disc Cutter Wear of TBM Using Magnetic Force},
journal = {Machines},
year = {2023},
volume = {11},
number = {3},
pages = {388},
doi = {10.3390/machines11030388}
}
EUVIMED