EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hard Milling Process Based on Compressed Cold Air-Cooling Using Vortex Tube for Sustainable and Smart Manufacturing

Luka Celent, Dražen Bajić, Sonja Jozić, Marko Mladineo

Machines · 10.02.2023 · 11 (2) · 264

DOI: 10.3390/machines11020264 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 10.02.2023. Verfasst von Luka Celent und 3 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MZOS 023-0692976-1742 project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Improving machining performance and meeting the requirements of sustainable production at the same time represents a major challenge for the metalworking industry and scientific community. One approach to satisfying the above challenge is to apply different types of cutting fluids or to optimise their usage during the machining process. The fact that cutting fluids are well known as significant environmental pollutants in the metalworking industry has encouraged researchers to discover new environmentally friendly ways of cooling and lubricating in the machining process. Therefore, the main goal is to investigate the influence of different machining conditions on the efficiency of hard machining and find a sustainable solution towards smart manufacturing. In the experimental part of the work, the influence of various machining parameters and conditions on the efficiency of the process was investigated and measured through the surface roughness, tool wear and cutting force components. Statistical data processing was carried out, and predictive mathematical models were developed. An important achievement is the knowledge of the efficiency of compressed cold air cooling for hard milling with the resulting lowest average flank wear of 0.05 mm, average surface roughness of 0.28 µm, which corresponds to grinding procedure roughness classes of N4 and N5, and average tool durability increase of 26% compared to dry cutting and conventional use of cutting fluids. Becoming a smart machining system was assured via technological improvement achieved through the reliable prediction of tool wear obtained by radial basis neural networks modelling, with a relative prediction error of 3.97%.

Förderung

  • MZOS 023-0692976-1742 project

Zitieren

APA

Celent, L., Bajić, D., Jozić, S., & Mladineo, M. (2023). Hard Milling Process Based on Compressed Cold Air-Cooling Using Vortex Tube for Sustainable and Smart Manufacturing. Machines, 11(2), 264. https://doi.org/10.3390/machines11020264

Vancouver

Celent L, Bajić D, Jozić S, Mladineo M. Hard Milling Process Based on Compressed Cold Air-Cooling Using Vortex Tube for Sustainable and Smart Manufacturing. Machines. 2023;11(2):264. doi:10.3390/machines11020264

BibTeX
@article{Celent2023,
  author = {Celent, Luka and Bajić, Dražen and Jozić, Sonja and Mladineo, Marko},
  title = {Hard Milling Process Based on Compressed Cold Air-Cooling Using Vortex Tube for Sustainable and Smart Manufacturing},
  journal = {Machines},
  year = {2023},
  volume = {11},
  number = {2},
  pages = {264},
  doi = {10.3390/machines11020264}
}
Kostenlos starten →