EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Rolling Bearing Fault Diagnosis Method Based on Switchable Normalization and a Deep Convolutional Neural Network

Xiaoyu Han, Yunpeng Cao, Junqi Luan, Ran Ao, Weixing Feng, Shuying Li

Machines · 30.01.2023 · 11 (2) · 185

DOI: 10.3390/machines11020185 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 30.01.2023. Verfasst von Xiaoyu Han und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Major Project of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aiming to address the problems of a low fault detection rate and poor diagnosis performance under different loads and noise environments, a rolling bearing fault diagnosis method based on switchable normalization and a deep convolutional neural network (SNDCNN) is proposed. The method effectively extracted the fault features from the raw vibration signal and suppressed high-frequency noise by increasing the convolution kernel width of the first layer and stacking multiple layers’ convolution kernels. To avoid losing the intensity information of the features, the K-max pooling operation was adopted at the pooling layer. To solve the overfitting problem and improve the generalization ability, a switchable normalization approach was used after each convolutional layer. The proposed SNDCNN was evaluated with two sets of rolling bearing datasets and obtained a higher fault detection rate than SVM and BP, reaching a fault detection rate of over 90% under different loads and demonstrating a better anti-noise performance.

Förderung

  • National Science and Technology Major Project of China

Zitieren

APA

Han, X., Cao, Y., Luan, J., Ao, R., Feng, W., & Li, S. (2023). A Rolling Bearing Fault Diagnosis Method Based on Switchable Normalization and a Deep Convolutional Neural Network. Machines, 11(2), 185. https://doi.org/10.3390/machines11020185

Vancouver

Han X, Cao Y, Luan J, Ao R, Feng W, Li S. A Rolling Bearing Fault Diagnosis Method Based on Switchable Normalization and a Deep Convolutional Neural Network. Machines. 2023;11(2):185. doi:10.3390/machines11020185

BibTeX
@article{Han2023,
  author = {Han, Xiaoyu and Cao, Yunpeng and Luan, Junqi and Ao, Ran and Feng, Weixing and Li, Shuying},
  title = {A Rolling Bearing Fault Diagnosis Method Based on Switchable Normalization and a Deep Convolutional Neural Network},
  journal = {Machines},
  year = {2023},
  volume = {11},
  number = {2},
  pages = {185},
  doi = {10.3390/machines11020185}
}
Kostenlos starten →