EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Functional Performance of a New Polymorphological Al2O3 Refractory Material for Auxiliary Equipment of Sintering Furnaces

Monika Spyrka, Piotr Kula, Sebastian Miszczak

Materials · 20.11.2026 · 19 (22) · 4919

DOI: 10.3390/ma19224919 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 20.11.2026. Verfasst von Monika Spyrka und 2 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Porous refractory components used as auxiliary equipment in oxide-ceramic sintering systems should combine sufficient mechanical integrity with low thermal mass and dimensional stability. The material investigated in this work was previously developed as a polymorphological Al2O3-based composite manufactured by a water-free uniaxial pressing route. Its manufacturing process, microstructural architecture, porosity, mechanical properties, and refractoriness under load were reported in an earlier study. The present work constitutes a continuation of that investigation and focuses on previously unpublished functional thermal properties, including thermal expansion, thermogravimetric–differential thermal analysis (TG–DTA) behavior, specific heat capacity, and sintering shrinkage. The composite exhibited a coefficient of thermal expansion ranging from 9.01 × 10−6 to 9.43 × 10−6 °C−1, a specific heat capacity of approximately 1114 J kg−1 °C−1 at 1000 °C, and linear shrinkage of approximately 1% after sintering at 1700 °C. To relate the mechanical performance of the material to its thermal mass, an energy efficiency index (EEI), defined as the ratio of flexural strength to volumetric heat capacity, was applied. Comparison with data for porous refractory materials available in the CES EduPack database placed the developed composite in an intermediate range of functional performance. The results indicate a potentially useful balance between mechanical integrity, dimensional stability, and volumetric heat capacity. However, the comparative assessment is based partly on database data, and long-term thermal-cycling durability requires separate experimental validation.

Zitieren

APA

Spyrka, M., Kula, P., & Miszczak, S. (2026). Functional Performance of a New Polymorphological Al2O3 Refractory Material for Auxiliary Equipment of Sintering Furnaces. Materials, 19(22), 4919. https://doi.org/10.3390/ma19224919

Vancouver

Spyrka M, Kula P, Miszczak S. Functional Performance of a New Polymorphological Al2O3 Refractory Material for Auxiliary Equipment of Sintering Furnaces. Materials. 2026;19(22):4919. doi:10.3390/ma19224919

BibTeX
@article{Spyrka2026,
  author = {Spyrka, Monika and Kula, Piotr and Miszczak, Sebastian},
  title = {Functional Performance of a New Polymorphological Al2O3 Refractory Material for Auxiliary Equipment of Sintering Furnaces},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {22},
  pages = {4919},
  doi = {10.3390/ma19224919}
}
Kostenlos starten →