Wear-Resistant Hybrid Metal–Composite Architectures for FRP Pipe Elbows Under Erosion–Corrosion: A Critical Review and Emerging Materials Perspective
Materials · 19.11.2026 · 19 (22) · 4913
DOI: 10.3390/ma19224913 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 19.11.2026. Verfasst von Jan Lean Tai und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Ministry of Higher Education Malaysia (MOHE) under the Higher Institution Centre of Excellence at the Institute of Tropical Forestry and Forest Products., the Ministry of Science and Higher Education of Poland with allocation to the Faculty of Mechanical Engineering, Bialystok University of Technology,.
Abstract (Originalsprache)
Fiber-reinforced polymer (FRP) and glass-reinforced plastic (GRP) pipe elbows are widely used in corrosive industrial environments but remain susceptible to localized degradation under particle-laden and chemically aggressive flow conditions. This critical narrative review examines the degradation mechanisms, mitigation strategies, and potential applications of fiber–metal laminate (FML)-inspired hybrid metal–composite (HMC) architectures for improving elbow durability. Published findings identify liner wear, matrix cracking, fiber exposure, interfacial degradation, and delamination as important contributors to progressive composite damage. The review distinguishes experimentally demonstrated erosion–corrosion synergy in metallic systems from the combined mechanical and environmental degradation mechanisms observed in FRP/GRP composites. Conventional protection approaches are critically evaluated, highlighting limitations associated with localized wear, structural integrity, and long-term durability. Among the proposed HMC architectures, localized metallic wear shields are identified as a near-term research priority because they directly target erosion hotspots while requiring comparatively limited structural modification. Embedded metallic meshes and perforated interlayers offer potential structural reinforcement rather than direct surface wear protection. However, existing evidence from related materials and structural configurations does not establish the performance of complete pressure-containing HMC elbows. Accordingly, staged experimental validation involving abrasion resistance, environmental compatibility, interfacial bond retention, and representative pressurized elbow testing is recommended. This review distinguishes established findings from proposed hybrid design concepts and identifies the technical requirements for their future development and qualification.
Förderung
- The Ministry of Higher Education Malaysia (MOHE) under the Higher Institution Centre of Excellence at the Institute of Tropical Forestry and Forest Products.
- the Ministry of Science and Higher Education of Poland with allocation to the Faculty of Mechanical Engineering, Bialystok University of Technology,
Zitieren
APA
Tai, J. L., Sultan, M. T. H., & Łukaszewicz, A. (2026). Wear-Resistant Hybrid Metal–Composite Architectures for FRP Pipe Elbows Under Erosion–Corrosion: A Critical Review and Emerging Materials Perspective. Materials, 19(22), 4913. https://doi.org/10.3390/ma19224913
Vancouver
Tai JL, Sultan MTH, Łukaszewicz A. Wear-Resistant Hybrid Metal–Composite Architectures for FRP Pipe Elbows Under Erosion–Corrosion: A Critical Review and Emerging Materials Perspective. Materials. 2026;19(22):4913. doi:10.3390/ma19224913
BibTeX
@article{Tai2026,
author = {Tai, Jan Lean and Sultan, Mohamed Thariq Hameed and Łukaszewicz, Andrzej},
title = {Wear-Resistant Hybrid Metal–Composite Architectures for FRP Pipe Elbows Under Erosion–Corrosion: A Critical Review and Emerging Materials Perspective},
journal = {Materials},
year = {2026},
volume = {19},
number = {22},
pages = {4913},
doi = {10.3390/ma19224913}
}
EUVIMED