EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Quasi-Static and High-Speed Compression of AlSi10Mg Menger Fractal Structures: An Interval-Dependent Experimental Assessment

Zhongying Dong, Xingbo Xie, Guili Yang, Rongze Wang, Xinghua Li, Huayuan Ma

Materials · 19.11.2026 · 19 (22) · 4909

DOI: 10.3390/ma19224909 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 19.11.2026. Verfasst von Zhongying Dong und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser powder bed fusion was used to fabricate first-, second-, and third-order (M1–M3) AlSi10Mg Menger structures. Sixty force–machine-displacement histories were obtained under quasi-static compression and nominal servo-hydraulic speeds of 5.4, 8.1, and 10 m/s, supported by quasi-static digital image correlation and high-speed images. Specific external work was evaluated over a common initial engineering strain of 4.66% (baseline A) and separately over order-specific minimum recorded high-speed strokes of 1.27, 5.69, and 17.74 mm (baseline B). Under baseline B, quasi-static specific work was 2.04, 11.80, and 39.16 J/g for M1–M3, respectively; these values reflect non-equivalent observation intervals. At the common strain, quasi-static work was 2.04, 1.63, and 1.02 J/g, versus 1.10, 1.77, and 1.19 J/g at 10 m/s. These are early-stage, machine-displacement-based comparisons, not measurements of complete crushing capacity. The short M1 high-speed interval and non-equivalent contact-zero procedures preclude interpreting its recorded work decrement as a validated material-rate effect. Corrected TOPSIS coefficients also depend on the evaluation interval and selected attributes, including a cross-regime consistency attribute with unresolved M1 uncertainty. The contribution is an experimentally bounded comparison of the tested as-built structures, rather than an unconditional order ranking or validated protection-design recommendation.

Zitieren

APA

Dong, Z., Xie, X., Yang, G., Wang, R., Li, X., & Ma, H. (2026). Quasi-Static and High-Speed Compression of AlSi10Mg Menger Fractal Structures: An Interval-Dependent Experimental Assessment. Materials, 19(22), 4909. https://doi.org/10.3390/ma19224909

Vancouver

Dong Z, Xie X, Yang G, Wang R, Li X, Ma H. Quasi-Static and High-Speed Compression of AlSi10Mg Menger Fractal Structures: An Interval-Dependent Experimental Assessment. Materials. 2026;19(22):4909. doi:10.3390/ma19224909

BibTeX
@article{Dong2026,
  author = {Dong, Zhongying and Xie, Xingbo and Yang, Guili and Wang, Rongze and Li, Xinghua and Ma, Huayuan},
  title = {Quasi-Static and High-Speed Compression of AlSi10Mg Menger Fractal Structures: An Interval-Dependent Experimental Assessment},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {22},
  pages = {4909},
  doi = {10.3390/ma19224909}
}
Kostenlos starten →