EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Boron-Nitride-Doped Graphene Oxide FETs for COVID-19 Detection: A Comparative Review Against Existing Market Solutions

Alexander H. Xu, Liena Zaidan, Saeed Takaloo, Dogu Ozyigit, Bersu Bastug Azer, Michal Bajcsy, Mustafa Yavuz

Materials · 19.11.2026 · 19 (22) · 4907

DOI: 10.3390/ma19224907 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 19.11.2026. Verfasst von Alexander H. Xu und 6 weiteren Autor:innen. Die Arbeit nennt 117 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Canadian Mathematics of Information Technology and Complex Systems Agency, Natural Sciences and Engineering Research Council of Canada (NSERC) Alliance, Discovery.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

COVID-19 point-of-care tests return results faster than centralized RT-PCR, but none combines high sensitivity, speed, low cost, and ease of use. This review compares a boron-nitride-doped graphene oxide (BN-GO) FET biosensor with commercial diagnostics and other graphene-based FET biosensors using LOD, PPA/NPA, detection time, cost, shelf life, and ease of use. Because the BN-GO platform is at technology readiness level 4 and has been tested only in buffer, the market comparison is treated as a gap analysis. The BN-GO FET biosensor showed promising early-stage analytical performance, responding rapidly to N-protein in buffer at its lowest tested concentration, below the detection limits of the other graphene FETs compared. However, the lowest-concentration response was obtained from an initial set of device tests. Future studies will assess the repeatability, reproducibility, clinical performance, and manufacturing scalability of the device. They will also focus on extending its shelf life, because the current estimate falls short of the WHO target product profile and would complicate stockpiling and distribution. The estimated cost per test is approximately the same as that of rapid antigen tests. These findings position the BN-GO FET biosensor as a promising next-generation candidate for point-of-care COVID-19 diagnostics if the remaining cost and shelf-life challenges are addressed.

Förderung

  • Canadian Mathematics of Information Technology and Complex Systems Agency
  • Natural Sciences and Engineering Research Council of Canada (NSERC) Alliance
  • Discovery

Zitieren

APA

Xu, A. H., Zaidan, L., Takaloo, S., Ozyigit, D., Azer, B. B., Bajcsy, M., & Yavuz, M. (2026). Boron-Nitride-Doped Graphene Oxide FETs for COVID-19 Detection: A Comparative Review Against Existing Market Solutions. Materials, 19(22), 4907. https://doi.org/10.3390/ma19224907

Vancouver

Xu AH, Zaidan L, Takaloo S, Ozyigit D, Azer BB, Bajcsy M, et al. Boron-Nitride-Doped Graphene Oxide FETs for COVID-19 Detection: A Comparative Review Against Existing Market Solutions. Materials. 2026;19(22):4907. doi:10.3390/ma19224907

BibTeX
@article{Xu2026,
  author = {Xu, Alexander H. and Zaidan, Liena and Takaloo, Saeed and Ozyigit, Dogu and Azer, Bersu Bastug and Bajcsy, Michal and Yavuz, Mustafa},
  title = {Boron-Nitride-Doped Graphene Oxide FETs for COVID-19 Detection: A Comparative Review Against Existing Market Solutions},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {22},
  pages = {4907},
  doi = {10.3390/ma19224907}
}
Kostenlos starten →