Cycle-Dependent Softening of Rubber-Metal Vibration Isolators Under Harmonic Compression
Materials · 19.11.2026 · 19 (22) · 4903
DOI: 10.3390/ma19224903 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 19.11.2026. Verfasst von Andrzej Grządziela und 1 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Centre for Research and Development.
Abstract (Originalsprache)
Rubber-metal mounts of shipboard machinery work for long periods under harmonic loading, and changes in their stiffness and damping shift the natural frequencies and vibration isolation margins of the foundation system. This study presents cyclic compression tests of commercial waisted mounts made of natural (NR), nitrile butadiene (NBR) and chloroprene (CR) rubber compounds of 45, 60 and 75 ShA hardness (hysteresis loops at 0.5 Hz, continuous runs at 4 Hz up to 105 cycles). An equivalent linear, cycle-dependent generalised Maxwell model identified from the first-harmonic stiffness is proposed. During the first 104 cycles, the storage stiffness decreased by 3–29% and was largely recovered after rest. Dissipated power and re-softening time constants are consistent with a substantial contribution of self-heating, although Mullins-type conditioning cannot be excluded. In a temporal extrapolation assessment on later-cycle data of the continuing specimens, the mean absolute error of the predicted storage stiffness was 11.1% for all nine variants and 8.5% without CR 75 ShA. Residual changes after rest were small for most variants, except for a 30% stiffening of NBR 75 ShA. The results are valid for the tested loading regime.
Förderung
- National Centre for Research and Development
Zitieren
APA
Grządziela, A., & Kluczyk, M. (2026). Cycle-Dependent Softening of Rubber-Metal Vibration Isolators Under Harmonic Compression. Materials, 19(22), 4903. https://doi.org/10.3390/ma19224903
Vancouver
Grządziela A, Kluczyk M. Cycle-Dependent Softening of Rubber-Metal Vibration Isolators Under Harmonic Compression. Materials. 2026;19(22):4903. doi:10.3390/ma19224903
BibTeX
@article{Grzdziela2026,
author = {Grządziela, Andrzej and Kluczyk, Marcin},
title = {Cycle-Dependent Softening of Rubber-Metal Vibration Isolators Under Harmonic Compression},
journal = {Materials},
year = {2026},
volume = {19},
number = {22},
pages = {4903},
doi = {10.3390/ma19224903}
}
EUVIMED