EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mesoscale Modelling of Compressive Fracture in Cenosphere Lightweight Concrete Using a Discrete Lattice Model

Chuo Zhao, Ka Li, Jing Zhang, Lingcui Zhang, Junxing Liu, Yongli Wang, Fengling Zhang

Materials · 18.11.2026 · 19 (22) · 4877

DOI: 10.3390/ma19224877 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.11.2026. Verfasst von Chuo Zhao und 6 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Shandong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cenosphere lightweight concrete (CLC) offers a means of reducing the self-weight of cementitious materials. This study combined compression testing and a two-dimensional mesoscale lattice model to investigate cement-based CLC (R-CLC) and alkali-activated slag-based CLC (A-CLC) at target fresh wet densities of 800–1000 kg/m3. A-CLC exhibited higher compressive strength despite the lower 28-day compressive strength of its cenosphere-free matrix: 18.30 MPa compared with 40.32 MPa for the cement-based matrix. The different binder compositions and water-to-binder ratios were considered when interpreting this comparison. CT-derived porosities were used to generate the mesoscale geometries. Matrix element properties were calibrated against pure-matrix tests, while the 900 kg/m3 CLC cases were used for composite-level calibration; the 800 and 1000 kg/m3 cases were reserved for validation. The model predicted predominantly interface-initiated damage in R-CLC and wall-initiated damage in A-CLC, followed by crack propagation and coalescence. These predictions depend on the adopted effective phase properties and discretisation. Increasing the specimen aspect ratio numerically reduced compressive strength, with a larger reduction for A-CLC in the investigated configurations. Scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS) provided qualitative interfacial elemental information.

Förderung

  • Natural Science Foundation of Shandong Province

Zitieren

APA

Zhao, C., Li, K., Zhang, J., Zhang, L., Liu, J., Wang, Y., & Zhang, F. (2026). Mesoscale Modelling of Compressive Fracture in Cenosphere Lightweight Concrete Using a Discrete Lattice Model. Materials, 19(22), 4877. https://doi.org/10.3390/ma19224877

Vancouver

Zhao C, Li K, Zhang J, Zhang L, Liu J, Wang Y, et al. Mesoscale Modelling of Compressive Fracture in Cenosphere Lightweight Concrete Using a Discrete Lattice Model. Materials. 2026;19(22):4877. doi:10.3390/ma19224877

BibTeX
@article{Zhao2026,
  author = {Zhao, Chuo and Li, Ka and Zhang, Jing and Zhang, Lingcui and Liu, Junxing and Wang, Yongli and Zhang, Fengling},
  title = {Mesoscale Modelling of Compressive Fracture in Cenosphere Lightweight Concrete Using a Discrete Lattice Model},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {22},
  pages = {4877},
  doi = {10.3390/ma19224877}
}
Kostenlos starten →