EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication and Process Verification of Large Length-to-Width Ratio Multi-Cavity Box Sections with Composites by Integral RTM Molding

Ye Li, Jing Guo, Xiancheng He, Hansong Liu, Xiangyu Zhong, Jianwen Bao

Materials · 18.11.2026 · 19 (22) · 4867

DOI: 10.3390/ma19224867 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.11.2026. Verfasst von Ye Li und 5 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In view of the structural characteristics of multi-cavity box sections, an integrated resin transfer molding (RTM) process was developed in this study. The rheological properties of the AC520RTM resin system were investigated. The results indicate that this resin system features low viscosity and a long pot life, making it suitable for the RTM fabrication of multi-cavity box sections. Combined with the structural design, layup design and mold design of the box section, process validation for manufacturing composite large length-to-width ratio multi-cavity box sections via integrated RTM forming technology was conducted. Ultrasonic A-scan inspection and destructive analysis on process-equivalent coupons were performed, and the porosity was determined to be below 0.5%. Deformation analysis was conducted for the box section, indicating that 94.59% of the profile deviations fall within 3 mm. A single specimen was subjected to the room temperature static strength test. The test results show that audible sounds occurred in the specimen once the load reaches 80% of the limit load. The maximum failure strain reaches 4689 με, and the failure load is 15,087 N, corresponding to 150.9% of the limit load and 100.6% of the ultimate load.

Zitieren

APA

Li, Y., Guo, J., He, X., Liu, H., Zhong, X., & Bao, J. (2026). Fabrication and Process Verification of Large Length-to-Width Ratio Multi-Cavity Box Sections with Composites by Integral RTM Molding. Materials, 19(22), 4867. https://doi.org/10.3390/ma19224867

Vancouver

Li Y, Guo J, He X, Liu H, Zhong X, Bao J. Fabrication and Process Verification of Large Length-to-Width Ratio Multi-Cavity Box Sections with Composites by Integral RTM Molding. Materials. 2026;19(22):4867. doi:10.3390/ma19224867

BibTeX
@article{Li2026,
  author = {Li, Ye and Guo, Jing and He, Xiancheng and Liu, Hansong and Zhong, Xiangyu and Bao, Jianwen},
  title = {Fabrication and Process Verification of Large Length-to-Width Ratio Multi-Cavity Box Sections with Composites by Integral RTM Molding},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {22},
  pages = {4867},
  doi = {10.3390/ma19224867}
}
Kostenlos starten →