EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Temperature and Assembly Conditions on the Bearing Performance of Composite Single-Bolt Double-Shear Joints

Dahai Zhang, Kaixin He, Pan Li, Bowen Liu, Ruochuan Zhou, Shibo Liang

Materials · 17.11.2026 · 19 (22) · 4864

DOI: 10.3390/ma19224864 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.11.2026. Verfasst von Dahai Zhang und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, the Jiangsu Provincial Science Fund for Distinguished Young Scholars.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aircraft composite bolted joints may be exposed to a wide range of service temperatures, yet the coupled effects of temperature and assembly conditions on their bearing performance remain insufficiently understood. This study investigated an epoxy-based carbon-fiber-reinforced polymer (CFRP)-to-metal single-bolt double-shear joint designed for a subsonic aircraft. Quasi-static bearing tests were conducted at −55 °C, 25 °C, and 70 °C to determine the ultimate loads and characterize the damage morphologies around the hole. A progressive-damage finite element model was subsequently developed to evaluate the effects of bolt–hole clearance, interference fit, and tightening torque. The mean experimental ultimate load decreased from 17.950 kN at −55 °C to 13.864 kN at 70 °C, representing a reduction of 22.8%. The corresponding relative deviations between the numerical and experimental results were 3.36%, 1.87%, and 0.79%. Bearing damage was the dominant failure mode at all three temperatures; damage propagation was more localized at −55 °C, whereas damage initiated earlier at 70 °C. The simulations showed that a 2% clearance provided relatively high bearing strength, a 2–3% interference fit yielded favorable load-carrying performance, and a 4% interference fit caused pronounced initial damage around the hole. Moderate tightening torque improved the bearing strength at −55 °C and 25 °C, whereas the strength generally decreased with increasing torque at 70 °C. These findings clarify the temperature dependence of assembly effects and provide guidance for the design of composite joints operating over a wide temperature range.

Förderung

  • National Natural Science Foundation of China
  • the Jiangsu Provincial Science Fund for Distinguished Young Scholars

Zitieren

APA

Zhang, D., He, K., Li, P., Liu, B., Zhou, R., & Liang, S. (2026). Effects of Temperature and Assembly Conditions on the Bearing Performance of Composite Single-Bolt Double-Shear Joints. Materials, 19(22), 4864. https://doi.org/10.3390/ma19224864

Vancouver

Zhang D, He K, Li P, Liu B, Zhou R, Liang S. Effects of Temperature and Assembly Conditions on the Bearing Performance of Composite Single-Bolt Double-Shear Joints. Materials. 2026;19(22):4864. doi:10.3390/ma19224864

BibTeX
@article{Zhang2026,
  author = {Zhang, Dahai and He, Kaixin and Li, Pan and Liu, Bowen and Zhou, Ruochuan and Liang, Shibo},
  title = {Effects of Temperature and Assembly Conditions on the Bearing Performance of Composite Single-Bolt Double-Shear Joints},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {22},
  pages = {4864},
  doi = {10.3390/ma19224864}
}
Kostenlos starten →