EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Refractory Metal Cores and Their Diffusion Protective Coatings for Investment Casting of Superalloy Blades: A Review

Lifeng Tao, Enze Liu, Zheng Tan, Weihua Liu, Dan Jia, Xin Xin, Likui Ning, Jian Tong, Haiying Li

Materials · 16.11.2026 · 19 (22) · 4858

DOI: 10.3390/ma19224858 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.11.2026. Verfasst von Lifeng Tao und 8 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To raise the inlet temperature of gas turbine engines, ultra-fine internal cooling channels are required for turbine blades manufactured via investment casting. Conventional ceramic cores suffer from brittleness, floating deformation, and poor alloy filling, resulting in extremely low casting yield. Refractory metal cores (RMCs) can fabricate channels thinner than 0.5 mm and suppress typical casting defects, usually combined with ceramic cores as hybrid structures in production. However, severe oxidation during shell firing and interfacial corrosion by molten superalloys greatly limit the large-scale application of RMCs, making protective diffusion coatings essential. This paper comprehensively reviews RMC structural design, diverse assembly positioning methods for hybrid cores, and two core removal technologies. It elaborates on two dominant diffusion coating systems—aluminide and silicide coatings prepared by pack cementation. Current research gaps include the absence of standardized core design criteria, immature mass fabrication of gradient composite coatings, and incomplete industrial solutions for additively manufactured integrated RMCs. Future development should focus on additive manufacturing of complex integrated cores and gradient silico-aluminide composite coatings, which are expected to realize stable long-term protection and promote widespread industrial use of RMCs in superalloy blade casting.

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Tao, L., Liu, E., Tan, Z., Liu, W., Jia, D., Xin, X., Ning, L., Tong, J., & Li, H. (2026). Refractory Metal Cores and Their Diffusion Protective Coatings for Investment Casting of Superalloy Blades: A Review. Materials, 19(22), 4858. https://doi.org/10.3390/ma19224858

Vancouver

Tao L, Liu E, Tan Z, Liu W, Jia D, Xin X, et al. Refractory Metal Cores and Their Diffusion Protective Coatings for Investment Casting of Superalloy Blades: A Review. Materials. 2026;19(22):4858. doi:10.3390/ma19224858

BibTeX
@article{Tao2026,
  author = {Tao, Lifeng and Liu, Enze and Tan, Zheng and Liu, Weihua and Jia, Dan and Xin, Xin and Ning, Likui and Tong, Jian and Li, Haiying},
  title = {Refractory Metal Cores and Their Diffusion Protective Coatings for Investment Casting of Superalloy Blades: A Review},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {22},
  pages = {4858},
  doi = {10.3390/ma19224858}
}
Kostenlos starten →