EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fused Filament Fabrication of Soda-Lime Glass Feedstocks

Thomas Hanemann, Hannes Hering, Martin Zürn, Ralf Eickhoff, Dorit Nötzel

Materials · 16.11.2026 · 19 (22) · 4853

DOI: 10.3390/ma19224853 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.11.2026. Verfasst von Thomas Hanemann und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Research Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing methods are rather seldom used for the fabrication of glass parts. In this work, the knowledge gained from glass injection molding and ceramic fused filament fabrication (FFF) was extended to the usage of the FFF process chain covering the individual process steps compounding, 3D printing and thermal post-processing for the realization of soda-lime glass parts. The selection of suitable feedstock compositions, containing a soda-lime glass filler and a binder system, consisting of polyethylene glycol (PEG), polyvinyl butyral (PVB), and stearic acid (SA) is essential for successful processing. Small cuboid and disk-shaped parts could be first printed and second debound and sintered to parts with relative densities between 94 up 98% depending on the initial feedstock composition. A further extension to the printing of a larger-sized micro reactor possessing internal hollow structures showed the principal feasibility of soda-lime glass FFF printing. Due to the presence of defects after printing, debinding and sintering was omitted. Consequently, further material and process optimization is necessary to eliminate part distortion and other defects, which is mandatory prior to successful process chain evaluation.

Förderung

  • German Research Foundation

Zitieren

APA

Hanemann, T., Hering, H., Zürn, M., Eickhoff, R., & Nötzel, D. (2026). Fused Filament Fabrication of Soda-Lime Glass Feedstocks. Materials, 19(22), 4853. https://doi.org/10.3390/ma19224853

Vancouver

Hanemann T, Hering H, Zürn M, Eickhoff R, Nötzel D. Fused Filament Fabrication of Soda-Lime Glass Feedstocks. Materials. 2026;19(22):4853. doi:10.3390/ma19224853

BibTeX
@article{Hanemann2026,
  author = {Hanemann, Thomas and Hering, Hannes and Zürn, Martin and Eickhoff, Ralf and Nötzel, Dorit},
  title = {Fused Filament Fabrication of Soda-Lime Glass Feedstocks},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {22},
  pages = {4853},
  doi = {10.3390/ma19224853}
}
Kostenlos starten →