EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical and Experimental Analysis of the Influence of Composite Insert Layers on the Ballistic Performance of Hybrid Soft Body Armors

Justyna Pinkos, Jakub Szary

Materials · 15.11.2026 · 19 (22) · 4841

DOI: 10.3390/ma19224841 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 15.11.2026. Verfasst von Justyna Pinkos und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Although traditional multi-ply textile ballistic packs effectively arrest handgun bullets, they often undergo excessive dynamic deflection toward the body, measured as Back-Face Signature (BFS). This can transfer impact energy to the wearer and cause life-threatening non-penetrating internal injuries, known as Behind-Armor Blunt Trauma (BABT). Incorporating rigid fiber-reinforced composite inserts into hybrid systems dissipates this energy over a larger area; however, selecting the optimal number of composite plies remains a key challenge in balancing maximum protection with the wearer’s mobility. To address this, this paper presents a numerical (LS-DYNA) and experimental analysis of a 9 mm Luger bullet (380 m/s) impacting a hybrid panel. The system comprised a 30-ply soft Twaron CT709 fabric backing and an epoxy/Twaron woven composite insert of 8, 12, or 20 layers. After calibrating the computational models, simulations were validated via ballistic range tests. During these tests, all variants successfully arrested the bullet and maintained BFS safely below the 44 mm limit outlined in the NIJ Standard. While initial kinetic energy absorption is independent of the insert’s thickness, the composite structure’s transverse stiffness drives subsequent deformation of the textile backing. Increasing the composite plies from 8 to 20 reduced maximum BFS from ~33 mm to ~20 mm, transforming the fabric’s deformation profile from steep and localized to flat and widely distributed.

Zitieren

APA

Pinkos, J., & Szary, J. (2026). Numerical and Experimental Analysis of the Influence of Composite Insert Layers on the Ballistic Performance of Hybrid Soft Body Armors. Materials, 19(22), 4841. https://doi.org/10.3390/ma19224841

Vancouver

Pinkos J, Szary J. Numerical and Experimental Analysis of the Influence of Composite Insert Layers on the Ballistic Performance of Hybrid Soft Body Armors. Materials. 2026;19(22):4841. doi:10.3390/ma19224841

BibTeX
@article{Pinkos2026,
  author = {Pinkos, Justyna and Szary, Jakub},
  title = {Numerical and Experimental Analysis of the Influence of Composite Insert Layers on the Ballistic Performance of Hybrid Soft Body Armors},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {22},
  pages = {4841},
  doi = {10.3390/ma19224841}
}
Kostenlos starten →