Mechanical Properties of Aeolian Sand Synergistically Stabilized with Multi-Source Solid Wastes and Basalt Fiber: Experimental Investigation and Discrete Element Modeling
Materials · 14.11.2026 · 19 (22) · 4835
DOI: 10.3390/ma19224835 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 14.11.2026. Verfasst von Siyu Liu und 3 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
To improve the tensile capacity and reduce the post-peak brittleness of stabilized aeolian sand, a binder comprising steel slag, ground granulated blast-furnace slag, phosphorus slag, and calcium carbide residue was combined with basalt fibers. Axial splitting tests using a four-factor, five-level orthogonal design and three-dimensional discrete element simulations investigated tensile behavior and reinforcement mechanisms. Basalt fibers increased tensile strength by 6.58–131.82%, slowed post-peak strength degradation, and improved specimen integrity after failure. Factor influence decreased in the order of binder content, water content, fiber content, and fiber length. All four factors exhibited statistically significant main effects on tensile strength at the 0.05 level, with binder content having the greatest influence. The optimum combination within the investigated ranges was 3% water content, 18.05% binder content, 1.5% fiber content, and 12 mm fiber length, yielding a mean tensile strength of 0.195 MPa after 28 d of curing in verification tests. Simulations reproduced the experimental mechanical responses, with tensile cracks dominating both models. Through load sharing and crack bridging, fibers maintained tensile load-transfer paths near cracks and restricted relative particle displacement, delaying crack coalescence and overall failure. These findings clarify the mesoscopic reinforcement mechanisms and support aeolian sand improvement and industrial solid waste utilization.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Liu, S., Qian, Z., Li, Z., & Shanbayi, J. (2026). Mechanical Properties of Aeolian Sand Synergistically Stabilized with Multi-Source Solid Wastes and Basalt Fiber: Experimental Investigation and Discrete Element Modeling. Materials, 19(22), 4835. https://doi.org/10.3390/ma19224835
Vancouver
Liu S, Qian Z, Li Z, Shanbayi J. Mechanical Properties of Aeolian Sand Synergistically Stabilized with Multi-Source Solid Wastes and Basalt Fiber: Experimental Investigation and Discrete Element Modeling. Materials. 2026;19(22):4835. doi:10.3390/ma19224835
BibTeX
@article{Liu2026,
author = {Liu, Siyu and Qian, Zengzhen and Li, Ziang and Shanbayi, Jiayidaer},
title = {Mechanical Properties of Aeolian Sand Synergistically Stabilized with Multi-Source Solid Wastes and Basalt Fiber: Experimental Investigation and Discrete Element Modeling},
journal = {Materials},
year = {2026},
volume = {19},
number = {22},
pages = {4835},
doi = {10.3390/ma19224835}
}
EUVIMED