EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhanced Surface Area of Mesoporous Alumina Fibers for Fluoride Removal

Xiangyu Li, Lin Wang, Andong Li, Yunkun Chen, Yewei Zhang, Yujun Zhao, Xiaotong Jin, Kangkang Yuan

Materials · 10.11.2026 · 19 (22) · 4776

DOI: 10.3390/ma19224776 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.11.2026. Verfasst von Xiangyu Li und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shandong Provincial Natural Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mesoporous alumina fibers (MAFs) combine strong fluoride affinity with a readily recoverable fibrous form, but calcination-induced shrinkage and pore collapse can reduce the surface area available for adsorption. MAF and nine variants doped with alkali metals (Li, Na, and K), alkaline earth metals (Mg, Sr, and Ba), or rare earth metals (Y, La, and Ce) were prepared by CTAB-assisted electrospinning to evaluate how dopant selection affected post-calcination pore structure, BET surface area, and fluoride removal. Li, Na, and K doping mainly increased the pore volume and average pore diameter, whereas Mg, Sr, Ba, Y, La, and Ce doping increased the BET surface area and reduced the average pore diameter relative to MAF. Across the ten samples, fluoride removal efficiency was strongly and positively correlated with BET surface area (R2 = 0.9149, p < 0.001). MAF-Y exhibited the highest BET surface area (237.89 m2·g−1) and fluoride removal efficiency (68.00%). Its Langmuir-estimated maximum adsorption capacity was 51.49 mg·g−1 at 50 °C and pH 7. Overall, dopant selection effectively regulated the post-calcination pore structure of MAF. Y doping most effectively preserved the mesoporous structure, thereby increasing BET surface area and fluoride removal.

Förderung

  • Shandong Provincial Natural Science Foundation

Zitieren

APA

Li, X., Wang, L., Li, A., Chen, Y., Zhang, Y., Zhao, Y., Jin, X., & Yuan, K. (2026). Enhanced Surface Area of Mesoporous Alumina Fibers for Fluoride Removal. Materials, 19(22), 4776. https://doi.org/10.3390/ma19224776

Vancouver

Li X, Wang L, Li A, Chen Y, Zhang Y, Zhao Y, et al. Enhanced Surface Area of Mesoporous Alumina Fibers for Fluoride Removal. Materials. 2026;19(22):4776. doi:10.3390/ma19224776

BibTeX
@article{Li2026,
  author = {Li, Xiangyu and Wang, Lin and Li, Andong and Chen, Yunkun and Zhang, Yewei and Zhao, Yujun and Jin, Xiaotong and Yuan, Kangkang},
  title = {Enhanced Surface Area of Mesoporous Alumina Fibers for Fluoride Removal},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {22},
  pages = {4776},
  doi = {10.3390/ma19224776}
}
Kostenlos starten →