EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Shear Connections Between LVL Slabs and GLT Beams: Experimental and Numerical Study

Marcin Chybiński iD, Łukasz Polus iD, Robert Studziński iD

Materials · 09.11.2026 · 19 (21) · 4760

DOI: 10.3390/ma19214760 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.11.2026. Verfasst von Marcin Chybiński und 2 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Building Engineering, Faculty of Civil and Transport Engineering, Poznan University of Technology, Piotrowo 5 Street, 61-138 Poznan, Pol…. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sustainable timber–timber composite floors can facilitate CO2 reduction. The structural behaviour of composite floors strongly depends on the load-carrying capacity and stiffness of shear connections. For this reason, this investigation characterises the behaviour of timber–timber composite screwed connections. Push-out tests were conducted on twelve samples, each consisting of a glued-laminated timber beam, laminated veneer lumber panels, and screws. The effects of screw type and penetration depth on connection load–slip behaviour were analysed in terms of load-carrying capacity, slip modulus, and failure mode. The laminated veneer lumber panels in the numerical models were connected with the glued-laminated timber beams using discrete connections, the behaviour of which was described using the three-linear load–slip models. The push-out FE simulations were used to verify and calibrate the experimentally derived tri-linear spring characteristics intended for subsequent numerical analyses of timber–timber composite structural members. The numerical model was therefore focused on reproducing the global connection response rather than the detailed local mechanics of individual fasteners.

Schlagwörter

Stichwörter der Autor:innen

discrete connectionsglued-laminated timber (GLT)laminated veneer lumber (LVL)numerical modelspush-out testshear connectiontimber–timber composite structures

Autor:innen und Institutionen

  • Institute of Building Engineering, Faculty of Civil and Transport Engineering, Poznan University of Technology, Piotrowo 5 Street, 61-138 Poznan, Poland.

ORCID-Profile: Marcin Chybiński, Łukasz Polus, Robert Studziński

Förderung

  • Ministry of Science and Higher Education

Zitieren

APA

Chybiński, M., Polus, Ł., & Studziński, R. (2026). Shear Connections Between LVL Slabs and GLT Beams: Experimental and Numerical Study. Materials, 19(21), 4760. https://doi.org/10.3390/ma19214760

Vancouver

Chybiński M, Polus Ł, Studziński R. Shear Connections Between LVL Slabs and GLT Beams: Experimental and Numerical Study. Materials. 2026;19(21):4760. doi:10.3390/ma19214760

BibTeX
@article{Chybiski2026,
  author = {Chybiński, Marcin and Polus, Łukasz and Studziński, Robert},
  title = {Shear Connections Between LVL Slabs and GLT Beams: Experimental and Numerical Study},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4760},
  doi = {10.3390/ma19214760}
}
Kostenlos starten →