EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Closing the Cathode Loop in Lithium-Ion Battery Recycling: From Metal Recovery to Direct Regeneration of NMC and LFP Cathodes

Arman Umirzakov iD, Yedil Otunchi, Alimzhan Serikbekov, Ainagul Kemelbekova iD, Aigul Shongalova, Ekaterina Bondar iD, Elena Dmitriyeva

Materials · 09.11.2026 · 19 (21) · 4753

DOI: 10.3390/ma19214753 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 09.11.2026. Verfasst von Arman Umirzakov und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Physics and Technology, Satbayev University, Ibraimov Str., 11, Almaty 050013, Kazakhstan. Die Arbeit nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan, Investigation of Tin-Based Perovskites on Flexible Substrates.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium-ion battery (LIB) recycling is usually compared across pyrometallurgical, hydrometallurgical and direct routes as if the optimal route were independent of the cathode being recycled. This review argues that cathode chemistry is the governing variable. Following the chain from cathode chemistry and degradation mechanism through pretreatment, recycling route and recovered product to electrochemical validation, we compare LiNixMnyCozO2 (NMC, 111 to 811) and LiFePO4 (LFP), with LiCoO2 and LiNi0.8Co0.15Al0.05O2 as references. LFP degradation is dominated by Li loss and Fe/Li anti-site defects in an intact olivine framework, which makes direct regeneration mechanistically well founded. Ni-rich NMC suffers microcracking, surface reconstruction and proton sensitivity, so its regeneration increasingly becomes upcycling into a different product, whereas hydrometallurgical resynthesis currently has the strongest industrial validation. Reported recovery efficiencies above 95% rarely demonstrate battery-grade products, and published energy estimates for the same route and chemistry differ by a factor of up to about 1.5 because of inconsistent system boundaries. We propose a cathode-to-cathode circularity framework and a minimum reporting set that link material recovery to validation in new cells.

Schlagwörter

Stichwörter der Autor:innen

LiFePO4Ni-rich cathodesblack masscircular economydirect regenerationgraphite recyclinghydrometallurgylife-cycle assessmentlithium-ion battery recyclingrelithiation

Autor:innen und Institutionen

  • Institute of Physics and Technology, Satbayev University, Ibraimov Str., 11, Almaty 050013, Kazakhstan.
  • Department of Materials Science, Nanotechnology and Engineering Physics, Satbayev University, Satbayev Str., 22a, Almaty 050013, Kazakhstan.

ORCID-Profile: Arman Umirzakov, Ainagul Kemelbekova, Ekaterina Bondar

Förderung

  • Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan
  • Investigation of Tin-Based Perovskites on Flexible Substrates

Zitieren

APA

Umirzakov, A., Otunchi, Y., Serikbekov, A., Kemelbekova, A., Shongalova, A., Bondar, E., & Dmitriyeva, E. (2026). Closing the Cathode Loop in Lithium-Ion Battery Recycling: From Metal Recovery to Direct Regeneration of NMC and LFP Cathodes. Materials, 19(21), 4753. https://doi.org/10.3390/ma19214753

Vancouver

Umirzakov A, Otunchi Y, Serikbekov A, Kemelbekova A, Shongalova A, Bondar E, et al. Closing the Cathode Loop in Lithium-Ion Battery Recycling: From Metal Recovery to Direct Regeneration of NMC and LFP Cathodes. Materials. 2026;19(21):4753. doi:10.3390/ma19214753

BibTeX
@article{Umirzakov2026,
  author = {Umirzakov, Arman and Otunchi, Yedil and Serikbekov, Alimzhan and Kemelbekova, Ainagul and Shongalova, Aigul and Bondar, Ekaterina and Dmitriyeva, Elena},
  title = {Closing the Cathode Loop in Lithium-Ion Battery Recycling: From Metal Recovery to Direct Regeneration of NMC and LFP Cathodes},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4753},
  doi = {10.3390/ma19214753}
}
Kostenlos starten →