EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Rapid Evaluation of Chaboche–Voce Material Model Parameters Through a Fully Reversed Strain-Controlled Test

Alessandro Guazzini iD, Federico Bucciarelli iD, Gabriele Tarica iD, Tommaso Grossi iD, Bernardo Disma Monelli iD

Materials · 07.11.2026 · 19 (21) · 4735

DOI: 10.3390/ma19214735 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 07.11.2026. Verfasst von Alessandro Guazzini und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil and Industrial Engineering, University of Pisa, Largo Lucio Lazzarino 1, 56122 Pisa, Italy. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Modeling cyclic plasticity remains challenging due to the high computational cost of nonlinear constitutive models and the large number of parameters requiring evaluation, which are often temperature-dependent. This work presents a systematic procedure for identifying the parameters of the Chaboche–Voce model, one of the most widely adopted constitutive models for cyclic plasticity and commonly implemented in finite element software. Due to its nonlinear formulation, however, parameter evaluation is not straightforward. The parameters governing the kinematic hardening response are determined through a simple least-squares fit, yielding an analytical expression for a branch of the mid-life stabilized cycle. The Voce parameters are subsequently obtained by solving an analytical equation followed by a further least-squares fit. The resulting methodology provides a systematic approach for characterizing materials exhibiting both cyclic hardening and softening. The procedure was applied to two materials: 42CrMo4+QT tested at room temperature at different strain ranges for two different values of mean strain and 1Cr-1Mo-0.25V steel tested at different temperatures and strain ranges. The proposed approach provides satisfactory constitutive parameters while requiring virtually negligible computational cost, making it suitable for efficient material characterization and subsequent finite element implementation.

Schlagwörter

Stichwörter der Autor:innen

Chaboche modelcyclic plasticityhigh-temperature testingleast-squares fittinglow-cycle fatigue

Autor:innen und Institutionen

  • Department of Civil and Industrial Engineering, University of Pisa, Largo Lucio Lazzarino 1, 56122 Pisa, Italy.
  • Baker Hughes Nuovo Pignone s.r.l, Via Felice Matteucci 2, 50127 Florence, Italy.
  • TeCIP Institute, Scuola Superiore Sant'Anna, Piazza Martiri della Libertà 33, 56127 Pisa, Italy.

ORCID-Profile: Alessandro Guazzini, Federico Bucciarelli, Gabriele Tarica, Tommaso Grossi, Bernardo Disma Monelli

Zitieren

APA

Guazzini, A., Bucciarelli, F., Tarica, G., Grossi, T., & Monelli, B. D. (2026). Rapid Evaluation of Chaboche–Voce Material Model Parameters Through a Fully Reversed Strain-Controlled Test. Materials, 19(21), 4735. https://doi.org/10.3390/ma19214735

Vancouver

Guazzini A, Bucciarelli F, Tarica G, Grossi T, Monelli BD. Rapid Evaluation of Chaboche–Voce Material Model Parameters Through a Fully Reversed Strain-Controlled Test. Materials. 2026;19(21):4735. doi:10.3390/ma19214735

BibTeX
@article{Guazzini2026,
  author = {Guazzini, Alessandro and Bucciarelli, Federico and Tarica, Gabriele and Grossi, Tommaso and Monelli, Bernardo Disma},
  title = {Rapid Evaluation of Chaboche–Voce Material Model Parameters Through a Fully Reversed Strain-Controlled Test},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4735},
  doi = {10.3390/ma19214735}
}
Kostenlos starten →