Nickel-Free Anodes for Hydrocarbon- and Ammonia-Fueled Solid Oxide Fuel Cells: A Review
Materials · 06.11.2026 · 19 (21) · 4731
DOI: 10.3390/ma19214731 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 06.11.2026. Verfasst von Nur Hanisah Hadi und 7 weiteren Autor:innen. Beteiligte Einrichtung: Fuel Cell Institute, Universiti Kebangsaan Malaysia, Bangi 43600, Selangor, Malaysia. Die Arbeit nennt 132 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Higher Education, Ministry of Science and Higher Education of the Republic of Kazakhstan, Ministry of Higher Education Malaysia.
Abstract (Originalsprache)
Solid oxide fuel cells (SOFCs) can efficiently convert chemical fuels into electricity, but stable anode operation with hydrocarbon and ammonia fuels remains challenging. Conventional nickel (Ni)-based anodes are prone to carbon deposition, sulfur poisoning, and redox instability, which has stimulated the development of nickel-free (Ni-free) alternatives. This review summarizes the electrochemical conversion pathways of hydrocarbon and ammonia fuels and the limitations of Ni-based anodes under these conditions. Ni-free anode materials are then evaluated against a common set of criteria: surface and defect chemistry, fuel activation, electrochemical performance, carbon tolerance, and structural stability. Within this framework, hydrocarbon activation, carbon formation and removal, and degradation under carbon-based fuels are discussed with particular attention. Among the Ni-free materials, perovskite and double-perovskite oxides provide compositional flexibility with good redox activity, whereas ceria-based fluorite oxides offer favorable oxygen storage and transport properties. Beyond these oxide families, exsolution-derived oxides and oxide composites can generate active interfaces that promote fuel conversion and carbon removal. However, no single material family currently combines high activity, carbon tolerance, and long-term stability under all operating conditions. Therefore, future work should focus on anode operation under realistic fuel conditions, long-term durability and interfacial stability during thermal cycling, and scalable manufacturing routes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Fuel Cell Institute, Universiti Kebangsaan Malaysia, Bangi 43600, Selangor, Malaysia.
- Department of Energy Systems Engineering, U.S.-Pakistan Centre for Advanced Studies in Energy (USPCAS-E), National University of Sciences & Technology (NUST), H-12 Sector, Islamabad 44000, Pakistan.
- Department of Chemical and Environmental Engineering, Universidad Técnica Federico Santa María, Vicuña Mackenna 3939, Santiago 8940897, Chile.
- Institute of Physical and Technical Sciences, L.N. Gumilyov Eurasian National University, Astana 010008, Kazakhstan.
- Centre for Research Impact & Outcome, Chitkara University, Rajpura 140401, Punjab, India.
ORCID-Profile: Mustafa Anwar, Yathavan Subramanian, Nursultan Aidarbekov, Packiaraj Rajagopal, Muhammed Ali Shaikh Abdul Kader Abdul Hameed
Förderung
- Ministry of Higher Education
- Ministry of Science and Higher Education of the Republic of Kazakhstan
- Ministry of Higher Education Malaysia
Zitieren
APA
Hadi, N. H., Anwar, M., Subramanian, Y., Aidarbekov, N., Bekmyrza, K., Rajagopal, P., Kabyshev, A., & Shaikh Abdul Kader Abdul Hameed, M. A. (2026). Nickel-Free Anodes for Hydrocarbon- and Ammonia-Fueled Solid Oxide Fuel Cells: A Review. Materials, 19(21), 4731. https://doi.org/10.3390/ma19214731
Vancouver
Hadi NH, Anwar M, Subramanian Y, Aidarbekov N, Bekmyrza K, Rajagopal P, et al. Nickel-Free Anodes for Hydrocarbon- and Ammonia-Fueled Solid Oxide Fuel Cells: A Review. Materials. 2026;19(21):4731. doi:10.3390/ma19214731
BibTeX
@article{Hadi2026,
author = {Hadi, Nur Hanisah and Anwar, Mustafa and Subramanian, Yathavan and Aidarbekov, Nursultan and Bekmyrza, Kenzhebatyr and Rajagopal, Packiaraj and Kabyshev, Asset and Shaikh Abdul Kader Abdul Hameed, Muhammed Ali},
title = {Nickel-Free Anodes for Hydrocarbon- and Ammonia-Fueled Solid Oxide Fuel Cells: A Review},
journal = {Materials},
year = {2026},
volume = {19},
number = {21},
pages = {4731},
doi = {10.3390/ma19214731}
}
EUVIMED