Effect of Nb Content on Tribocorrosion Behavior of TiZrNbTa Refractory Multi-Principal Element Alloys in Sodium Chloride Solution
Materials · 06.11.2026 · 19 (21) · 4727
DOI: 10.3390/ma19214727 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 06.11.2026. Verfasst von Zening Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Beijing Advanced Innovation Center for Materials Genome Engineering, Corrosion and Protection Center, Institute for Advanced Materials and Technology…. Die Arbeit nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Beijing.
Abstract (Originalsprache)
In this work, the effect of Nb content on the microstructure, passive film stability, and tribocorrosion behavior of TiZrNbTa refractory multi-principal element alloys (RMPEAs) was evaluated in 0.9 wt.% NaCl solution. Three designed alloys, Ti45Zr45Nb5Ta5, Ti35Zr35Nb25Ta5 and Ti31.67Zr31.67Nb31.67Ta5, were examined via electrochemical measurements, reciprocating sliding tests, X-ray photoelectron spectroscopy and surface/subsurface characterization. All alloys exhibited a single-phase body-centered cubic (BCC) solid solution. Increasing Nb refined dendritic grains but aggravated elemental segregation and reduced hardness from 320 ± 10 HV to 230 ± 10 HV. Reductions in corrosion and passive current densities demonstrated improved corrosion resistance and passive film stability. However, repassivation kinetics deteriorated because reduced Ti and Zr availability limited their preferential oxidation, which governed rapid passive film formation on fresh surfaces. Accordingly, higher Nb did not yield superior tribocorrosion resistance. The wear mechanism shifted from mild abrasive wear with continuous tribofilms toward severe ploughing, plastic deformation, delamination and microcracking. Under open-circuit potential (OCP) conditions, the average friction coefficient increased from 0.51 ± 0.05 to 0.78 ± 0.08, and the tribocorrosion rate rose from (3.75 ± 0.11) × 10−3 to (10.27 ± 0.30) × 10−3 mm3·N−1·m−1. Pure mechanical wear accounted for 70.72–79.11% of total material loss, and corrosion-accelerated wear dominated the synergistic component. The degraded performance at high Nb contents arose from the combined influence of decreased hardness, severe segregation, pit-triggered crack growth and suppressed surface work hardening. All of these factors amplified corrosion-accelerated wear. These findings revealed the dual function of Nb in TiZrNbTa RMPEAs. Nb stabilized the passive film while exacerbating tribocorrosion damage.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Beijing Advanced Innovation Center for Materials Genome Engineering, Corrosion and Protection Center, Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083, China.
ORCID-Profile: Yu Yan
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Beijing
Zitieren
APA
Wang, Z., Zhang, Y., Wu, J., Yan, Y., & Qiao, L. (2026). Effect of Nb Content on Tribocorrosion Behavior of TiZrNbTa Refractory Multi-Principal Element Alloys in Sodium Chloride Solution. Materials, 19(21), 4727. https://doi.org/10.3390/ma19214727
Vancouver
Wang Z, Zhang Y, Wu J, Yan Y, Qiao L. Effect of Nb Content on Tribocorrosion Behavior of TiZrNbTa Refractory Multi-Principal Element Alloys in Sodium Chloride Solution. Materials. 2026;19(21):4727. doi:10.3390/ma19214727
BibTeX
@article{Wang2026,
author = {Wang, Zening and Zhang, Yi and Wu, Jinping and Yan, Yu and Qiao, Lijie},
title = {Effect of Nb Content on Tribocorrosion Behavior of TiZrNbTa Refractory Multi-Principal Element Alloys in Sodium Chloride Solution},
journal = {Materials},
year = {2026},
volume = {19},
number = {21},
pages = {4727},
doi = {10.3390/ma19214727}
}
EUVIMED