EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanistic Study on Nb Microalloying Synergistically Enhancing the Cryogenic Strength–Toughness of Austenitic Stainless Steel

Lei Huang, Riqing Huang, Qing Li, Xiangzhu Wu, Tingping Hou, Tianliang Zhao iD, Sundas Arshad, Marina Afzal, Faiqa Barkat, Kaiming Wu

Materials · 06.11.2026 · 19 (21) · 4719

DOI: 10.3390/ma19214719 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.11.2026. Verfasst von Lei Huang und 9 weiteren Autor:innen. Beteiligte Einrichtung: Guangxi BG New Materials Co., Ltd., Beihai 536000, China. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Project of Hubei Province, Science and Technology Program of Guangxi Zhuang Autonomous Region, The 111 project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Overcoming the strength–ductility trade-off at cryogenic temperatures is a key bottleneck for austenitic stainless steels. This study investigated the effects of Nb additions (0, 0.03, and 0.06 wt.%) on the mechanical properties and fracture behavior of 304 steel from room temperature (RT) to −196 °C. Within the investigated range, the 0.06 wt.% Nb steel produced the largest measured response. Compared with the Nb-free steel, the RT yield strength and elongation after fracture increased by ~5% and 2.4%, respectively; at −196 °C, they increased by 11.1% and 4.1%, and impact toughness by 31.8%, mitigating the low-temperature strength–ductility trade-off. Fractography revealed a transition from brittle cleavage/mixed fracture to dimple-dominated ductile fracture. The improvement in mechanical properties is consistent with the refined microstructure and the modified inclusion distribution, with the underlying mechanisms likely involving grain refinement and the solid-solution strengthening of the austenite matrix by Nb. It should be noted that, owing to experimental limitations, the deformation-induced α′-martensite was not quantitatively characterized in the present study, and no rigorous quantitative correlation has yet been established between inclusion characteristics and low-temperature impact toughness. Consequently, the relative contribution of each contributing factor to the observed performance enhancement remains unresolved. Nevertheless, this work provides experimental support for the microalloying design of ultra-low-temperature austenitic stainless steels.

Schlagwörter

Stichwörter der Autor:innen

304 austenitic stainless steelNb microalloyingcryogenic temperatureimpact propertiestensile properties

Autor:innen und Institutionen

  • Guangxi BG New Materials Co., Ltd., Beihai 536000, China.
  • School of Metallurgy and Energy, International Research Institute for Steel Technology, Wuhan University of Science and Technology, Wuhan 430081, China.

ORCID-Profile: Tianliang Zhao

Förderung

  • Science and Technology Project of Hubei Province
  • Science and Technology Program of Guangxi Zhuang Autonomous Region
  • The 111 project
  • Science and Technology Program of Guangxi Zhuang Autonomous Region, China

Zitieren

APA

Huang, L., Huang, R., Li, Q., Wu, X., Hou, T., Zhao, T., Arshad, S., Afzal, M., Barkat, F., & Wu, K. (2026). Mechanistic Study on Nb Microalloying Synergistically Enhancing the Cryogenic Strength–Toughness of Austenitic Stainless Steel. Materials, 19(21), 4719. https://doi.org/10.3390/ma19214719

Vancouver

Huang L, Huang R, Li Q, Wu X, Hou T, Zhao T, et al. Mechanistic Study on Nb Microalloying Synergistically Enhancing the Cryogenic Strength–Toughness of Austenitic Stainless Steel. Materials. 2026;19(21):4719. doi:10.3390/ma19214719

BibTeX
@article{Huang2026,
  author = {Huang, Lei and Huang, Riqing and Li, Qing and Wu, Xiangzhu and Hou, Tingping and Zhao, Tianliang and Arshad, Sundas and Afzal, Marina and Barkat, Faiqa and Wu, Kaiming},
  title = {Mechanistic Study on Nb Microalloying Synergistically Enhancing the Cryogenic Strength–Toughness of Austenitic Stainless Steel},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4719},
  doi = {10.3390/ma19214719}
}
Kostenlos starten →