EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal Transport and Functional Properties of Conformal Coatings for Automotive Electronics

Wojciech Żyłka iD, Beata Giża, Małgorzata Pociask-Biały iD, Piotr Potera iD, Barbara Pilch-Pitera iD

Materials · 04.11.2026 · 19 (21) · 4699

DOI: 10.3390/ma19214699 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.11.2026. Verfasst von Wojciech Żyłka und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Exact and Technical Sciences, Institute of Materials Engineering, University of Rzeszów, Pigonia 1, 35-310 Rzeszów, Poland. Die Arbeit nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a comparative analysis of the structural, electrical, optical, thermal, and mechanical properties of the conformal coatings used for electronic protection: acrylic coating, polyurethane coating, and silicone-modified acrylic coating. The chemical structure of the coatings was analyzed by Fourier-transform infrared (FTIR) spectroscopy, their electrical insulation properties were evaluated by electrical resistance measurements, and their optical properties were investigated by UV–Vis–NIR spectrophotometry over the 200–2500 nm range. The effects of coating type and actual coating thickness on heat transport and relative hardness were also evaluated. FTIR analysis revealed differences in the chemical structure of the investigated materials and confirmed the presence of functional groups characteristics of the respective coating types. The highest values electrical resistance recorded for the silicone-modified coating. UV–Vis–NIR measurements showed that both coating type and film thickness affected the reflectance characteristics in the visible and near-infrared ranges. The most favorable heat-transport parameters were obtained for selected acrylic and silicone-modified coating variants, whereas the thermal properties of the polyurethane coatings were more sensitive to changes in layer thickness. The obtained results confirm that the functional properties of conformal coatings depend on both their chemical structure and the actual thickness of the dry film, which should be taken into account when selecting an electrical insulating material when designing insulation in automotive electronic systems.

Schlagwörter

Stichwörter der Autor:innen

FTIRKönig pendulum hardnessUV–Vis–NIRautomotive electronicsconformal coatingsprotective coatingsthermal conductivity

Autor:innen und Institutionen

  • Faculty of Exact and Technical Sciences, Institute of Materials Engineering, University of Rzeszów, Pigonia 1, 35-310 Rzeszów, Poland.
  • University of Rzeszów, 35-310 Rzeszów, Poland.
  • Faculty of Chemistry, Department of Polymers and Biopolymers, Rzeszów University of Technology, Powstańców Warszawy 6, 35-029 Rzeszów, Poland.

ORCID-Profile: Wojciech Żyłka, Małgorzata Pociask-Biały, Piotr Potera, Barbara Pilch-Pitera

Förderung

  • Ministry of Science and Higher Education

Zitieren

APA

Żyłka, W., Giża, B., Pociask-Biały, M., Potera, P., & Pilch-Pitera, B. (2026). Thermal Transport and Functional Properties of Conformal Coatings for Automotive Electronics. Materials, 19(21), 4699. https://doi.org/10.3390/ma19214699

Vancouver

Żyłka W, Giża B, Pociask-Biały M, Potera P, Pilch-Pitera B. Thermal Transport and Functional Properties of Conformal Coatings for Automotive Electronics. Materials. 2026;19(21):4699. doi:10.3390/ma19214699

BibTeX
@article{yka2026,
  author = {Żyłka, Wojciech and Giża, Beata and Pociask-Biały, Małgorzata and Potera, Piotr and Pilch-Pitera, Barbara},
  title = {Thermal Transport and Functional Properties of Conformal Coatings for Automotive Electronics},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4699},
  doi = {10.3390/ma19214699}
}
Kostenlos starten →