EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

New Non-Destructive Surface Roughness Inspection of Additively Manufactured Metallic Parts Using Scanning Acoustic Microscopy

Elham Alfuqara iD, Matthias Hien iD, Edward André Olivera Apaza iD, Stephan Brandl iD

Materials · 04.11.2026 · 19 (21) · 4691

DOI: 10.3390/ma19214691 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.11.2026. Verfasst von Elham Alfuqara und 3 weiteren Autor:innen. Beteiligte Einrichtung: Technology Campus Cham, Technische Hochschule Deggendorf, 93413 Cham, Germany. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Interreg Bavaria-Czechia 2021-2027 programme.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Although additive manufacturing enables the production of metallic components with complex geometries, accurately characterizing their surfaces remains challenging, especially in regions beyond the reach of conventional techniques. To address this challenge, this study investigates scanning acoustic microscopy (SAM) as an automated, non-destructive method for measuring the surface roughness of stainless steel 316L cubes fabricated by selective laser melting. A dedicated image-processing pipeline was developed to detect the water–specimen interface in SAM B-scan images using robust surface echo tracking and convert it into a calibrated surface profile. ISO-based spatial filtering was then applied to separate roughness from measurement noise, waviness, and surface form, enabling the calculation of different surface roughness parameters. To evaluate the proposed method, Ra was selected for validation using seven reference standards with nominal values ranging from 0.8 to 50μm. The influence of Gaussian filtering was also investigated by comparing two formulations. SAM successfully distinguished all seven roughness levels, with absolute deviations ranging from 0.327 to 1.772μm for the cutoff-matched formulation and from 0.199 to 4.075μm for the simplified formulation. Furthermore, repeatability measurements demonstrated mean coefficients of variation below 2% across all investigated specimens. Comparison between the proposed SAM pipeline, digital and laser confocal microscopes showed mean absolute deviations of 0.75, 1.30, and 2.85μm, respectively, from shared reference values. Building on this comparison, the optical instruments were used to assess SAM measurements on fabricated cubes without known reference values. Overall, the findings support SAM as a complementary method for quantitative surface roughness evaluation.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingimage processingnon-destructive testingscanning acoustic microscopy (SAM)surface roughness

Autor:innen und Institutionen

  • Technology Campus Cham, Technische Hochschule Deggendorf, 93413 Cham, Germany.

ORCID-Profile: Elham Alfuqara, Matthias Hien, Edward André Olivera Apaza, Stephan Brandl

Förderung

  • Interreg Bavaria-Czechia 2021-2027 programme

Zitieren

APA

Alfuqara, E., Hien, M., Olivera Apaza, E. A., & Brandl, S. (2026). New Non-Destructive Surface Roughness Inspection of Additively Manufactured Metallic Parts Using Scanning Acoustic Microscopy. Materials, 19(21), 4691. https://doi.org/10.3390/ma19214691

Vancouver

Alfuqara E, Hien M, Olivera Apaza EA, Brandl S. New Non-Destructive Surface Roughness Inspection of Additively Manufactured Metallic Parts Using Scanning Acoustic Microscopy. Materials. 2026;19(21):4691. doi:10.3390/ma19214691

BibTeX
@article{Alfuqara2026,
  author = {Alfuqara, Elham and Hien, Matthias and Olivera Apaza, Edward André and Brandl, Stephan},
  title = {New Non-Destructive Surface Roughness Inspection of Additively Manufactured Metallic Parts Using Scanning Acoustic Microscopy},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4691},
  doi = {10.3390/ma19214691}
}
Kostenlos starten →