H2-Annealed Core–Shell Pt-Co/C Electrocatalysts with Enhanced Durability for the Oxygen Reduction Reaction
Materials · 04.11.2026 · 19 (21) · 4689
DOI: 10.3390/ma19214689 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 04.11.2026. Verfasst von Bingguo Xue und 12 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), School of Materials Science and Engineering, Northeastern University,…. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific and Technological Project of Yunnan Precious Metals Laboratory, National Natural Science Foundation of China, Natural Science Foundation of Liaoning Province.
Abstract (Originalsprache)
The oxygen reduction reaction (ORR) at the cathode remains a major kinetic bottleneck for proton-exchange-membrane fuel cells, and Pt-Co alloying is a well-established strategy for boosting Pt-mass-normalized ORR activity. However, the long-term durability of such alloys is limited by two largely independent degradation pathways, dealloying-induced Co leaching and nanoparticle coalescence, that are rarely addressed simultaneously. Here, a series of PtxCoy/C-H2 catalysts with varying Pt:Co ratios were synthesized via gel-confined co-reduction of Pt and Co precursors, phosphoric-acid-assisted carbonization into a mesoporous carbon support, and a subsequent H2-annealing step. XRD confirmed Pt-Co alloy formation with composition-dependent lattice contraction, while XPS showed that surface Pt:Co ratios consistently exceeded the nominal feed ratios across all compositions, indicating H2-annealing-induced Pt surface segregation and the formation of a Pt-enriched, core–shell-like architecture, further supported by TEM/EDS line-scan profiles. Among the series, Pt3Co1/C-H2 delivered ORR activity (E1/2, mass activity, and specific activity) essentially comparable to commercial Pt/C while reducing Pt loading by approximately 9 wt%, and retained the intrinsic four-electron ORR pathway (n = 3.78). After accelerated durability testing (10,000 cycles), Pt3Co1/C-H2 exhibited smaller E1/2 decay than Pt/C (48 vs. 52 mV), which is attributed to the concurrent suppression of nanoparticle coalescence by mesopore confinement and of Co leaching by the Pt-enriched surface. These results establish a generalizable design principle for decoupling the dominant degradation pathways of Pt-transition-metal alloy ORR catalysts while reducing precious-metal content.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China.
- State Key Laboratory of Precious Metal Functional Materials, Yunnan Precious Metals Laboratory Co., Ltd., Kunming 650106, China.
- Sino-Platinum Metals Semiconductor Materials (Yunnan) Co., Ltd., Kunming 650106, China.
Förderung
- Scientific and Technological Project of Yunnan Precious Metals Laboratory
- National Natural Science Foundation of China
- Natural Science Foundation of Liaoning Province
Zitieren
APA
Xue, B., Wang, W., Dai, Y., Liu, S., Zhou, L., Cui, H., Pei, H., Zhou, W., Liu, M., Dong, H., Wen, M., Chen, L., & Li, S. (2026). H2-Annealed Core–Shell Pt-Co/C Electrocatalysts with Enhanced Durability for the Oxygen Reduction Reaction. Materials, 19(21), 4689. https://doi.org/10.3390/ma19214689
Vancouver
Xue B, Wang W, Dai Y, Liu S, Zhou L, Cui H, et al. H2-Annealed Core–Shell Pt-Co/C Electrocatalysts with Enhanced Durability for the Oxygen Reduction Reaction. Materials. 2026;19(21):4689. doi:10.3390/ma19214689
BibTeX
@article{Xue2026,
author = {Xue, Bingguo and Wang, Wei and Dai, Yuxiang and Liu, Shaohong and Zhou, Limin and Cui, Hao and Pei, Hongying and Zhou, Wenyan and Liu, Manmen and Dong, Haigang and Wen, Ming and Chen, Li and Li, Song},
title = {H2-Annealed Core–Shell Pt-Co/C Electrocatalysts with Enhanced Durability for the Oxygen Reduction Reaction},
journal = {Materials},
year = {2026},
volume = {19},
number = {21},
pages = {4689},
doi = {10.3390/ma19214689}
}
EUVIMED