EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Application of Reverse Engineering and Numerical Simulation in the Development of a High-Pressure Die Casting Process

Karlo Jurković iD, Tomislav Staroveški, Branko Bauer, Tomislav Gotić

Materials · 03.11.2026 · 19 (21) · 4675

DOI: 10.3390/ma19214675 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 03.11.2026. Verfasst von Karlo Jurković und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Technology, University of Zagreb, 10000 Zagreb, Croatia. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The paper presents the application of 3D optical scanning and numerical simulation in the development of a high-pressure die casting process for a differential transmission cover. The geometry of the existing casting was digitized using a 3D optical scanner, followed by reconstruction of the CAD model using reverse engineering. Based on the reconstructed geometry, the gating system and overflow elements were defined, and a numerical model of the die casting process was developed. Numerical analysis was performed using the ProCAST software package, with the filling of the die cavity, solidification of the molten metal, temperature distribution, and the potential occurrence of characteristic casting defects, including air entrainment and shrinkage porosity, being analyzed. The simulation results showed favorable filling and solidification behavior, with only localized areas exhibiting an increased potential for shrinkage porosity. The conducted research demonstrates the applicability of combining 3D scanning, reverse engineering, and numerical simulation as an effective approach to the development and optimization of die casting processes.

Schlagwörter

Stichwörter der Autor:innen

3D optical scanningcasting defectshigh-pressure die castingnumerical simulationreverse engineering

Autor:innen und Institutionen

  • Department of Technology, University of Zagreb, 10000 Zagreb, Croatia.
  • Fripol d.o.o., 42220 Ljubešćica, Croatia.

ORCID-Profile: Karlo Jurković

Zitieren

APA

Jurković, K., Staroveški, T., Bauer, B., & Gotić, T. (2026). Application of Reverse Engineering and Numerical Simulation in the Development of a High-Pressure Die Casting Process. Materials, 19(21), 4675. https://doi.org/10.3390/ma19214675

Vancouver

Jurković K, Staroveški T, Bauer B, Gotić T. Application of Reverse Engineering and Numerical Simulation in the Development of a High-Pressure Die Casting Process. Materials. 2026;19(21):4675. doi:10.3390/ma19214675

BibTeX
@article{Jurkovi2026,
  author = {Jurković, Karlo and Staroveški, Tomislav and Bauer, Branko and Gotić, Tomislav},
  title = {Application of Reverse Engineering and Numerical Simulation in the Development of a High-Pressure Die Casting Process},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4675},
  doi = {10.3390/ma19214675}
}
Kostenlos starten →