In-Plane Impact Response of Re-Entrant Auxetic Honeycombs with Spatially Graded Material Strength
Materials · 03.11.2026 · 19 (21) · 4674
DOI: 10.3390/ma19214674 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 03.11.2026. Verfasst von Mehmet Seha Tatlıer. Beteiligte Einrichtung: Mechanical Engineering Department, Osmaniye Korkut Ata University, 80000 Osmaniye, Turkey. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Re-entrant auxetic honeycombs have attracted considerable interest as lightweight energy-absorbing structures because of their distinctive deformation mechanisms and favorable crushing characteristics. This study investigates the dynamic in-plane crushing response of isotropic and functionally graded re-entrant honeycombs, emphasizing material-property grading rather than conventional geometric grading. Cellular geometry, relative density, and structural mass were maintained identically, while grading was introduced exclusively through continuous variation in parent-material yield strength along the crushing direction. A rate-independent elastic–perfectly plastic model was employed at impact velocities of 50, 75, and 100 m/s, and the numerical response was assessed against an established analytical prediction of dynamic crushing resistance. The results show that strength grading influences collapse localization, force transmission, and progressive cellular compaction. Compared with the isotropic configuration, the graded structures exhibit reduced maximum crushing forces while maintaining or improving mean crushing resistance, energy absorption, specific energy absorption, and crush force efficiency. The effects depend on impact velocity and reflect interactions among structural inertia, collapse progression, and spatially distributed plastic resistance. A relatively compliant impact-side region facilitates controlled deformation initiation, while progressively stronger regions sustain resistance during subsequent collapse. Overall, strength grading improves the balance between peak-load reduction and energy absorption without changing cellular architecture or structural mass.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Mechanical Engineering Department, Osmaniye Korkut Ata University, 80000 Osmaniye, Turkey.
ORCID-Profile: Mehmet Seha Tatlıer
Zitieren
APA
Tatlıer, M. S. (2026). In-Plane Impact Response of Re-Entrant Auxetic Honeycombs with Spatially Graded Material Strength. Materials, 19(21), 4674. https://doi.org/10.3390/ma19214674
Vancouver
Tatlıer MS. In-Plane Impact Response of Re-Entrant Auxetic Honeycombs with Spatially Graded Material Strength. Materials. 2026;19(21):4674. doi:10.3390/ma19214674
BibTeX
@article{Tatler2026,
author = {Tatlıer, Mehmet Seha},
title = {In-Plane Impact Response of Re-Entrant Auxetic Honeycombs with Spatially Graded Material Strength},
journal = {Materials},
year = {2026},
volume = {19},
number = {21},
pages = {4674},
doi = {10.3390/ma19214674}
}
EUVIMED