EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Ti Addition on the Microstructure and Mechanical Properties of L-PBF-Fabricated CoCrNi Medium-Entropy Alloys

Zhongqiang Liu, Shuya Liang, Guan Xu, Siyuan Peng iD

Materials · 31.10.2026 · 19 (21) · 4651

DOI: 10.3390/ma19214651 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 31.10.2026. Verfasst von Zhongqiang Liu und 3 weiteren Autor:innen. Beteiligte Einrichtung: Well Technology Company Limited, Foshan 528225, China. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fujian Provincial Department of Science and Technology, Xiamen University of Technology, Natural Science Foundation of Fujian Province, China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser powder bed fusion (L-PBF) delivers significant advantages for manufacturing medium-/high-entropy alloys (MEAs/HEAs), owing to its near-net-shape manufacturing and the ability to fabricate complex geometries. In this paper, a series of (CoCrNi)100−xTix (x = 0, 1, 2, 4 wt.%) MEAs were successfully fabricated by L-PBF technology, and the effect of Ti addition on the microstructure and mechanical properties was systematically investigated. The results show that L-PBF CoCrNi-4wt.%Ti alloy processed with a laser power of 275 W and the scanning speed of 1000 mm/s delivered a high yield strength of 777.5 MPa and ultimate tensile strength of 1054.5 MPa, along with a ductility of 20.8%. Compared with the L-PBF CoCrNi alloy, the CoCrNi-4 wt.%Ti alloy shows an increase in yield strength from 684.8 to 777.5 MPa and in ultimate tensile strength from 961.1 to 1054.5 MPa, accompanied by a decrease in uniform elongation from 27.8% to 20.8% (a reduction of seven percentage points, approximately 25% relative). The present work offers a promising pathway to improve the performance of additively manufactured medium-entropy alloys.

Schlagwörter

Stichwörter der Autor:innen

CoCrNi medium-entropy alloyadditive manufacturinglaser powder bed fusiontitanium alloying

Autor:innen und Institutionen

  • Well Technology Company Limited, Foshan 528225, China.
  • School of Materials Science and Engineering, Xiamen University of Technology, Xiamen 361024, China.

ORCID-Profile: Siyuan Peng

Förderung

  • Fujian Provincial Department of Science and Technology
  • Xiamen University of Technology
  • Natural Science Foundation of Fujian Province, China

Zitieren

APA

Liu, Z., Liang, S., Xu, G., & Peng, S. (2026). Effect of Ti Addition on the Microstructure and Mechanical Properties of L-PBF-Fabricated CoCrNi Medium-Entropy Alloys. Materials, 19(21), 4651. https://doi.org/10.3390/ma19214651

Vancouver

Liu Z, Liang S, Xu G, Peng S. Effect of Ti Addition on the Microstructure and Mechanical Properties of L-PBF-Fabricated CoCrNi Medium-Entropy Alloys. Materials. 2026;19(21):4651. doi:10.3390/ma19214651

BibTeX
@article{Liu2026,
  author = {Liu, Zhongqiang and Liang, Shuya and Xu, Guan and Peng, Siyuan},
  title = {Effect of Ti Addition on the Microstructure and Mechanical Properties of L-PBF-Fabricated CoCrNi Medium-Entropy Alloys},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4651},
  doi = {10.3390/ma19214651}
}
Kostenlos starten →