EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanism-Based and Experimentally Calibrated Modelling Strategy for Prestressed I-Shaped UHPFRC–Steel Composite Beams with Continuous Shear Connectors

Peter Harsányi iD, Norbert Randl iD, Nguyen Viet Tue

Materials · 31.10.2026 · 19 (21) · 4644

DOI: 10.3390/ma19214644 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 31.10.2026. Verfasst von Peter Harsányi und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Civil Engineering and Architecture, Carinthia University of Applied Sciences (CUAS), Villacher Straße 1, A-9800 Spittal, Austria. Die Arbeit nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Austrian Research Promotion Agency.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a finite element investigation of prestressed I-shaped Ultra-High-Performance Fibre-Reinforced Concrete (UHPFRC)–steel composite beams with continuous puzzle-shaped shear connectors. Experimentally derived material and bond relationships are implemented in three-dimensional models in ATENA Science. The tensile response is identified from flexural tests evaluated by digital image correlation and specimen-level inverse analysis, while the compression input is derived from cube, cylinder and prism tests. Beam I-2 is used for structural model selection. Separate studies assess the tensile reference-size sensitivity at a fixed mesh and the mesh sensitivity at a fixed reference size. The selected 35 mm mesh and 25 mm Tension Characteristic Size are subsequently transferred to I-1 and I-3 without further specimen-specific adjustment. For I-1 to I-3, peak-load deviations are +10.1%, +4.9% and +0.7%, respectively; the corresponding deflection deviations are +8.3%, +1.0% and −12.7%. The models reproduce strand-controlled ultimate failure and qualitatively reproduce the observed steel-web strain-localisation patterns. An additional I-4 analysis reaches strand rupture instead of the experimentally observed tensile-flange splitting and overestimates its peak load by 25.4%, demonstrating a boundary of validity of the adopted symmetry-constrained model. Internal tensile splitting demand, compressive inelasticity and transverse flange deformation are interpreted numerically within these limitations.

Schlagwörter

Stichwörter der Autor:innen

ATENA ScienceUHPFRCcomposite beamcontinuous shear connectordigital image correlationfinite element modellingprestressing

Autor:innen und Institutionen

  • Faculty of Civil Engineering and Architecture, Carinthia University of Applied Sciences (CUAS), Villacher Straße 1, A-9800 Spittal, Austria.
  • Institute of Structural Concrete, Graz University of Technology, Lessingstraße 25, A-8010 Graz, Austria.

ORCID-Profile: Peter Harsányi, Norbert Randl

Förderung

  • Austrian Research Promotion Agency

Zitieren

APA

Harsányi, P., Randl, N., & Tue, N. V. (2026). Mechanism-Based and Experimentally Calibrated Modelling Strategy for Prestressed I-Shaped UHPFRC–Steel Composite Beams with Continuous Shear Connectors. Materials, 19(21), 4644. https://doi.org/10.3390/ma19214644

Vancouver

Harsányi P, Randl N, Tue NV. Mechanism-Based and Experimentally Calibrated Modelling Strategy for Prestressed I-Shaped UHPFRC–Steel Composite Beams with Continuous Shear Connectors. Materials. 2026;19(21):4644. doi:10.3390/ma19214644

BibTeX
@article{Harsnyi2026,
  author = {Harsányi, Peter and Randl, Norbert and Tue, Nguyen Viet},
  title = {Mechanism-Based and Experimentally Calibrated Modelling Strategy for Prestressed I-Shaped UHPFRC–Steel Composite Beams with Continuous Shear Connectors},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4644},
  doi = {10.3390/ma19214644}
}
Kostenlos starten →