EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

MnO2 Cathodes Integrated with rGO for Highly Conductive Cement-Based Batteries

Song Gu, Yongchun Xu, Yifeng Xia, Hao Zhang

Materials · 31.10.2026 · 19 (21) · 4643

DOI: 10.3390/ma19214643 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 31.10.2026. Verfasst von Song Gu und 3 weiteren Autor:innen. Beteiligte Einrichtung: Zhaotong Expressway Investment and Development Co., Ltd., Zhaotong 657000, China. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Yunnan Provincial Department of Transportation, Yunnan Provincial Department of Transportation Major Science and Technology Project, Shiyanjia Lab.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cement-based batteries (CBBs) offer a new technical approach for constructing multifunctional structural energy storage systems that combine load-bearing and energy storage capabilities; however, the low intrinsic electronic conductivity of traditional cement-based composite cathodes severely limits their electrochemical performance. In this study, rGO was incorporated into the MnO2 cathode to construct a highly conductive MnO2@rGO composite cathode for Zn-MnO2 cement-based batteries. The interconnected rGO network forms continuous electron transport pathways between MnO2 particles while improving electrical contact between the active material and the current collector. Furthermore, the flake-like rGO framework promotes the uniform dispersion of MnO2 and mitigates particle agglomeration and structural degradation during repeated charge–discharge cycles. Thanks to these synergistic effects, the MnO2@rGO cathode achieved an electronic conductivity of 14.59 mS cm−1, representing a 6243.5% increase over pure MnO2. The assembled cement-based battery exhibited a discharge specific capacity of approximately 125 mAh g−1 at 0.01 mA and retained 80.7% of its initial capacity after 100 cycles. Electrochemical Impedance Spectroscopy (EIS) results showed that the charge transfer resistance was reduced from 148 Ω for pure MnO2 to 56 Ω, confirming accelerated interfacial charge transport and effective suppression of electrode polarization. This study reveals the crucial role of conductive carbon networks in overcoming the electronic transport bottleneck in cement-based electrodes and provides a scalable design strategy for developing highly conductive and multifunctional structured batteries.

Schlagwörter

Stichwörter der Autor:innen

MnO2 cathodecement-based batterieselectronic conductivityreduced graphene oxidestructural energy storage

Autor:innen und Institutionen

  • Zhaotong Expressway Investment and Development Co., Ltd., Zhaotong 657000, China.
  • Key Laboratory of Advanced Civil Engineering Materials, School of Materials Science and Engineering, Tongji University, Shanghai 201804, China.

Förderung

  • Yunnan Provincial Department of Transportation
  • Yunnan Provincial Department of Transportation Major Science and Technology Project
  • Shiyanjia Lab

Zitieren

APA

Gu, S., Xu, Y., Xia, Y., & Zhang, H. (2026). MnO2 Cathodes Integrated with rGO for Highly Conductive Cement-Based Batteries. Materials, 19(21), 4643. https://doi.org/10.3390/ma19214643

Vancouver

Gu S, Xu Y, Xia Y, Zhang H. MnO2 Cathodes Integrated with rGO for Highly Conductive Cement-Based Batteries. Materials. 2026;19(21):4643. doi:10.3390/ma19214643

BibTeX
@article{Gu2026,
  author = {Gu, Song and Xu, Yongchun and Xia, Yifeng and Zhang, Hao},
  title = {MnO2 Cathodes Integrated with rGO for Highly Conductive Cement-Based Batteries},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4643},
  doi = {10.3390/ma19214643}
}
Kostenlos starten →