Metal Additive Manufacturing for Automotive Applications: Technologies, Materials, Industrial Uses, and Future Directions
Materials · 31.10.2026 · 19 (21) · 4635
DOI: 10.3390/ma19214635 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 31.10.2026. Verfasst von Álvaro Rodríguez-Díaz und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering, Campus of Arrosadía, Public University of Navarre, 31006 Pamplona, Spain. Die Arbeit nennt 146 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union, Agencia Estatal de Investigación.
Abstract (Originalsprache)
Metal additive manufacturing (MAM) offers automotive manufacturers design and supply-chain options, but published demonstrations do not by themselves establish production readiness or economic advantage. This critical narrative review connects process selection, alloy behaviour, component requirements and the complete manufacturing chain. It covers laser powder bed fusion, directed energy deposition, binder jetting and metal material extrusion, distinguishing direct vehicle parts from tooling, repair and spare parts. The synthesis identifies the following three recurring constraints: fatigue performance cannot be inferred from tensile strength; sintering-based routes require control of shrinkage and local defects; and printing productivity must be separated from output of accepted finished parts. Published examples include a 10% piston mass reduction and a 17% moulding-cycle reduction, both reported by industrial sources rather than established as sector-wide effects. A requirement-led selection framework, condition-specific material benchmarks and a qualitative economic assessment connect these findings to engineering decisions. The strongest opportunities occur where functional integration, avoided tooling or asset-life extension offset qualification and post-processing costs. Evidence remains heterogeneous and the initial single-database search limits coverage; the review therefore does not claim a systematic census or a universal ranking of technologies. Adoption should be judged at the level of a qualified alloy–process–part combination against a credible conventional alternative.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Engineering, Campus of Arrosadía, Public University of Navarre, 31006 Pamplona, Spain.
- Department of Transportation and Maintenance of Vehicles, CIFP Fontecarmoa, 36600 Vilagarcía de Arousa, Spain.
- Department of Engineering, Campus of Tudela, Public University of Navarre, 31500 Tudela, Spain.
ORCID-Profile: Álvaro Rodríguez-Díaz, Eneko Villabona, Juan Sustacha, Tomas Ballesteros, Virginia Uralde, Fernando Veiga
Förderung
- European Union
- Agencia Estatal de Investigación
Zitieren
APA
Rodríguez-Díaz, Á., Villabona, E., Sustacha, J., Ballesteros, T., Uralde, V., & Veiga, F. (2026). Metal Additive Manufacturing for Automotive Applications: Technologies, Materials, Industrial Uses, and Future Directions. Materials, 19(21), 4635. https://doi.org/10.3390/ma19214635
Vancouver
Rodríguez-Díaz Á, Villabona E, Sustacha J, Ballesteros T, Uralde V, Veiga F. Metal Additive Manufacturing for Automotive Applications: Technologies, Materials, Industrial Uses, and Future Directions. Materials. 2026;19(21):4635. doi:10.3390/ma19214635
BibTeX
@article{RodrguezDaz2026,
author = {Rodríguez-Díaz, Álvaro and Villabona, Eneko and Sustacha, Juan and Ballesteros, Tomas and Uralde, Virginia and Veiga, Fernando},
title = {Metal Additive Manufacturing for Automotive Applications: Technologies, Materials, Industrial Uses, and Future Directions},
journal = {Materials},
year = {2026},
volume = {19},
number = {21},
pages = {4635},
doi = {10.3390/ma19214635}
}
EUVIMED