EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Physics-Informed Framework for Force-to-Stress Conversion in Small Punch Creep Tests of Creep-Resistant Alloys at High Temperatures

Manlin Huang, Limin Wei, Yi Cheng, Kaishu Guan

Materials · 30.10.2026 · 19 (21) · 4620

DOI: 10.3390/ma19214620 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.10.2026. Verfasst von Manlin Huang und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Power Engineering, East China University of Science and Technology, Shanghai 200237, China. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National MCF Energy R&D Program of China, National Natural Science Foundation of China, National MCF Energy R&D Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The small punch creep test (SPCT) requires only a small amount of material, but converting the applied force into an equivalent uniaxial creep stress remains difficult. This study presents a physics-informed framework that uses transfer learning for this conversion in creep-resistant alloys at high temperatures. A Teacher Model is trained on uniaxial creep rupture data to relate rupture life to stress, temperature, and chemical composition. A Mapper Network then estimates the equivalent uniaxial stress from the SPCT force, temperature, and composition, so that the Teacher Model reproduces the measured SPCT rupture life. The physical constraints are this rupture life equivalence and an empirical force-to-stress anchor; the network does not solve a creep constitutive equation. The conversion was examined for P91 steel, 2.25Cr1MoV steel, 1CrMoV steel, and Incoloy 800H, using specimens of 0.5 mm thickness. For these alloys, the converted stresses are compared with uniaxial Larson–Miller curves. The resulting force-to-stress ratio varies with temperature, force, and material within the tested range.

Schlagwörter

Stichwörter der Autor:innen

data interpretationforce-to-creep stress ratiosmall punch creep testtransfer learning

Autor:innen und Institutionen

  • School of Mechanical and Power Engineering, East China University of Science and Technology, Shanghai 200237, China.
  • State Key Laboratory of Low-Carbon Thermal Power Generation Technology and Equipments, Harbin 150046, China.
  • Harbin Boiler Company Limited, Harbin 150046, China.

Förderung

  • National MCF Energy R&D Program of China
  • National Natural Science Foundation of China
  • National MCF Energy R&D Program of China

Zitieren

APA

Huang, M., Wei, L., Cheng, Y., & Guan, K. (2026). A Physics-Informed Framework for Force-to-Stress Conversion in Small Punch Creep Tests of Creep-Resistant Alloys at High Temperatures. Materials, 19(21), 4620. https://doi.org/10.3390/ma19214620

Vancouver

Huang M, Wei L, Cheng Y, Guan K. A Physics-Informed Framework for Force-to-Stress Conversion in Small Punch Creep Tests of Creep-Resistant Alloys at High Temperatures. Materials. 2026;19(21):4620. doi:10.3390/ma19214620

BibTeX
@article{Huang2026,
  author = {Huang, Manlin and Wei, Limin and Cheng, Yi and Guan, Kaishu},
  title = {A Physics-Informed Framework for Force-to-Stress Conversion in Small Punch Creep Tests of Creep-Resistant Alloys at High Temperatures},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4620},
  doi = {10.3390/ma19214620}
}
Kostenlos starten →